Question Locked

Connecting Windows 2003 to IBM DS3200 Storage

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello All.

I'm having trouble configuring an IBM DS3200 storage to work with Windows 2003.

I've managed to configure the logical drives on the storage using the Storage Manager Client but I can't make my Windows 2003 see them.
The host client service is installed and running, I tried the hot_add tool, everything and no luck.
I'm also not able to automatically discover the host from the storage manager software.

Anyone has any ideas?

3 replies

by salim

Is that storage available into device manager?
If is is scsi type , make sure you have installed the scsi driver for it.
Do you see it when you start the system , on system bootup???
If it is a SCSI terminator on the system, change the terminator on the back and see if it detect it?
If all above works fine , then open backup software proble and try see if the backup program detect the backup device.
Finally, if all the above steps fails, I will call IBM to support the device.

by mottaguedes

Hi Salim, thanks for your answer.
Let me give some more details.

I'm having a big trouble trying to make my second DS3200 storage to work with Windows 2003 (non-cluster).

My storage A has a logical drive, assigned to a host, everything is working fine.
In my storage B I created the logical drives I needed, created a host, linked the drives to the host, used the hot_add util and rescaned the disks on the Windows 2003 server, but I still can't see the new disks.
I've tried everything, restarted the IBM storage agent service, rescanned athe disks after that, changed the LUNs in the storage manager, everything. :(

I should say that the storage subsystems are out-of-band.

Anyone has any ideas, any step-by-step tutorial, anything?

Thank you very much for any help!!!

This discussion is closed to new replies.