6 replies
by charlesflove Accepted solution
by oh smeg Accepted solution
If the slower computers have considerably less hardware than the faster ones or a lot less RAM this could be problem.
Doesn't matter how fast the Network Cards can communicate if the system itself can not send/receive data at that speed.
Another possibility is that you have the 3 other systems on a different Switch/Hub which is a slower Switch/Hub and is limiting the data transfer speeds.
Col
by charlesflove Accepted solution
Agree about the hardware in principle but they are all very different and when I was testing I wasn't running any applications. Ironically the maching I now use is the oldest, an old desktop with a very poor spec and limited RAM so don't think it can be a 'load' issue.
The machines are all on the same home network and so use the same switch. In fact I have tried fast and slow machnes at the same physical location - same result so it must the machine themselves.
I have looked for other posts on this subject on various forums but can't find anything.
by fixit Accepted solution
by tobif Accepted solution
Some services come with their own local client, which whill try different ways to connect.
So a theory might be that some computers get a udp based protocol, whereas others end up on tcp, leading to a lot of packets being split on the way, and hickups every now and then if some packets are lost.
Hmm. About packets being lost... If you're using a wireless network, do check the internet speed without the vpn link from each of the computers. What if radio interference from neighbours hits your internal network? (Interference from other wlan may be found with metageek inSSIDer)
by greybeard770 Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending