Question Locked
0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This is a new one on me. Alright, the computer connects to internet and network fine in the office area. I take it to another section and it cannot connect to the internet even though it pings it. I try another computer I know works fine and the same problem. I changed the ethernet cable, and the switch and still the same problem. We have had a computer in this area before with no problem. I also used dhcp, and manually put in the gateway and address, and still a no go.
10 replies
by ballart Accepted solution
Clarifications
by kenone Accepted solution
What kind of switch are we talking about here?
by ballart Accepted solution
a netgear 5 port switch, GS605 I believe.
by snuffy09 Accepted solution
your running out of DHCP addresses? or you have an IP conflict?
by ballart Accepted solution
We only use probably 80 addresses. We manually put in ip addresses we do not use dhcp, but I tried it just to see.
by kenone Accepted solution
by ballart Accepted solution
after all those switches I mentioned you then hit the router. All other computers are working fine. The switch before it converts to fiber optic goes to a computer and it works fine. Keep in mind this computer was working fine a couple weeks ago, and no changes had been made to it.
by kenone Accepted solution
Take a laptop, go to the main building plug in to the first switch, boot it up and see if it works. Then work your way down the line to find where it fails. My guess is the far end of the fibre.
This discussion is closed to new replies.
Trending Software posts
Sort by Trending
1 helpful
1 reply
Question Unanswered
How Are Teams Testing AI-Generated Code Before Production?
0 helpful
0 replies
0 helpful
5 replies
0 helpful
20 replies
Discussion
Is There any Reverse Video Search Tool
0 helpful
8 replies