7 replies
by jmar17
From Novell's site (http://support.novell.com/cgi-bin/search/search.pl?database_name=kb&type=HTML&docid=%03%20F190693%3a961622566%3a%20%28%20catalog%20%29%20%20%07%01%00&byte_count=13683):
A catalog is an NDS* object that stores information from the NDS database. The catalog stores only objects and properties that you specify and lets you find information about those objects without a time-consuming search of the entire Directory...
Also, check out
http://www.novell.com/documentation/lg/ftpserv/docui/index.html#../ftp_enu/data/fbbcjhjd.html
for info on configuring contextless login and setting up catalog.
Hope this helps!
by mcintyrem
by wayne
If this is a new NetWare install you will need to create the catalog(s) depending on how you wish to structure searches, groups, etc... (There are Master and slave catalog types) If you have never done this, as with anything Novell, read, read, readand test before implementing! It's not hard but requires attention. (Check www.novell.com or buy Novell's guide to NetWare 5. Both have good examples/instructions) Once you have your catalog(s) created you can then direct the client to the location.[IE tree = * * Cat = .catalog.location -Obviously substitute appropriate values here]
Just remember that careful attention to detail here will reward you with instant success since it is a pretty simple precedure.
by mcintyrem
by wayne
You didn't mention it but it sounds like a similar problem an account I serviced had after they tried to implement ZENWorks.
If you are running ZEN check your policies. It sounds almost as if there is a DYNAMIC LOCAL USER and the MANAGE EXISTINGNT ACCOUNTS and/or VOLATILE USER options are checked. This could and would (depending on your setup) cause the problem you describe.
Hope this might help!
by mcintyrem
by mcintyrem
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending