Discussion Locked

Cool me down

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am looking to find out if there is a way of converting an older style case into a case to support the Cel 341 D CPU. That is to say, is there an aftermarket heat extracting pipe & fan that one could fit to the side panel to assist in keeping the cpu at or below 38 degrees celcius.
Or can this method be overcome with some other cooling device - eg: bigger fan, bigger heatsink, faster fan, more case fans or ????
Please also suggest where I could get such items in OZ.

Cheers

Rob A

5 replies

by jamesrl

Efficacy of chimneys? Not so sure. Mine broke its flimsy mounting bracket so its not installed but the case still stays cool.

I would look for a good case fan and a great CPU fan.

I shop online at Tigerdirect - they must ship around the world, but surely there are some computer shops that would carry good ones - they are not that expensive.

by mjd420nova

You could get along with just adding another
fan to the case, keeping in mind the doubling
in noise level. If quietness falls into play,
then find another larger heat sink that will
help cool the CPU. Sometimes I will use some
plastic pieces and tape to create ducts or
pathways over the most vital areas.

by stykfigure

I just found a $30 case on Tiger that would work for that. The only hassle is moving the components over. Considering that a different heatsink and some fans will cost upwards of $20 -$30, not to mention the noise factor just seems easier to get a new case. I enjoy working on computers though, so this wouldn't bother me too much. Older style case? How old are we talking:) OZ? You in KS too? (SouthCentral here)

by ozi eagle

Hi,
Previous answers tell much of the story.

You may be pushing to keep the CPU at 38 deg C, considering that down here it can be hotter than that in the shade, at times. You can have 20 deg C difference between CPU and ambient. I would aim for aboput 70 deg C as a realistic max.

Extra case fan is also a good idea.
Keep all airways clean, as well as your heatsink fins.

Fans etc can be purchased from Dick Smith, Jaycar, or find a local computer swap meet and check out. See your local paper for ads for these, usually on a Sunday, once a month.

by hal 9000

Well I got lost a bit on the Celeron 341D but provided it's a socket 370 or newer you can always get one of the bigger heat sinks/fans to keep things cool. Zalman made a very nice Huge heat sink for the socket 370/A that was something like a half circle and had a tremulous surface area and a 80 MM fan that bolted to the Video card mounting point on the back of the case to keep it cool.

But the 38 C bit can be impossible to get depending on where you are here with 40 C daytime temps I am happy with seeing my CPU's below 75C but I do have the alarms and duty cycle throttle back when they reach 100 C but if you are in a much cooler area where the temp doesn't get above 15 C it shouldn't be a problem to keep a CPU of any type to 38 C. They will always be hotter than the ambient temp buy as OZ said about 20 C so you'll have to take into account the room temp and then add 20 C to that for a generally temp for the CPU. Even Water Cooling will not do much better than 18 C above room temp.

The only sure way to keep any CPU below 38 C would be Liquid Nitrogen cooling but really that's something out of the question and you would have to have a constant supply of liquid Nitrogen available.

Col

This discussion is closed to new replies.