Discussion Locked

Copying SCSI Hard Drives In NT4

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are installing a new server for a client. He is currently using Windows NT 4.0 on the PDC. He is replacing this server with a new one with different hardware, ie, cpu, mainboard, memory, hard-drives, etc. He wants to stay with the current OS/datathat he has on the current server. How can I copy all drives on the current server to the new server? Drives are all SCSI. The new mainboard is a dual processor board but at present only using one processor. Will I run into problems just doing a straight "copy" of the drives.

1 reply

by michael

I would use Norton Ghost to re-create the drive images. This exactly duplicates drives. This works great on similar machines. However, I probably wouldn't try to re-create the OS for different machines, unless there are lots of user/permissions or a mail server installed, or some such complex situation. Then i might give it a shot. However, i would also consider creating a BDC (backup domain controller) -the new system- then promoting it to PDC. This would preserve users/permisions, etc. I once did ghost a drive to a new machine and it worked. I set every driver to as generic as possible, i removed all but one modem and set that to generic. My biggest problem was the SCSI driver. The ultra-wide SCSI controllers use a different driver.If you are changing controller types in the new server, i would probably start by putting the old controller in the new server (or the new controller in the old server) to get an installed correct SCSI driver. It's very hard to fix this from the BSOD.

This discussion is closed to new replies.