Discussion Locked

Crashed hard drive data recovery?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have had several laptop users have hard drive crashes, and they have taken their laptops to some local geek shop to get the data from the hard drives, paying $50-200.

I would like to be able to do this myself, and I'm wondering what hardware and/or software would be required. What is the typical process for doing this?

9 replies

by jamesrl

Yes Maybe....

Depends on the nature of the crash and your own technical abilities.

There is software out there that can do much of the recovery effort for you. You would want to install the software on a PC, with some good amount of free disk space. You will need to know how to mount a HD as a second drive(much easier if your system uses cable select), and you have an adapter for the smaller drives that laptops use.

I've done quite a few in my day. Always recover files to another disk, not the disk you are repairing. Burn them on a CD after. I usually trash a HD thats crashed but thats your call.

James

by jamesrl

Yes my assumption was that if the local shop was charging up to $200 they were not dealing with clean rooms, burned out traces etc. I've used a "real" service and it starts at $1000 and goes up depending on the time and materials required.

If its for less than $200, I assume the boot sectors might be mangled.

James

by mjd420nova

There is alot of software out there to recover
data from a corrupted drive, but a technician
quite often has to contend with crashed heads,
burned traces and any number of hardware failures
making recovery impossible unless you have access
to a clean room and the replacement boards, drive
motors, actuators etc. Most often removing the
platters from said drive and mounting in a good
workable drive to recover the data. Big deal
for user but tedious and unforgiving process
for the recovery service. $50 to $200 is a
low estimate and too often there's nothing
that can be done. Recovery rates are near
75% which is pretty good but I've seen quite
a few damaged in shipping that would have been
a recoverable drive but for the shipping
damage.

by msittech

I have done this many times. I purchased a Mad Dog MegaVault? 2.5" IDE/ATA to USB 2.0 drive enclosure.(http://www.mdmm.com/products/enclosures/25aluminumusb.asp) They sell for around $30, but I found mine 1/2 off for $15. I just remove the drive from the laptop, insert it into the enclosure, and plug it into my USB port on my laptop. You can then view and transfer anything that is on the drive.
Before plugging in the crashed drive, I updated my anti-virus, and before accessing anything on the faulty drive, I ran a full virus scan.

If the drive is still unaccessable, let me know. I found another program that will rescue data from ANY operating system, (I just need to find where I stored the info on that one:)

by spidershrek

I usually don't buy any software unless its really good enough. I lost everything in my 200GB hardrive and format it after crash. Installed a program recomended by a friend called Restorer2000. I was able to recover 94 percent of the documents i had, including music , spreadsheets and different applications. I will suggest you give it a try. http://www.bitmart.net/r2k.shtml

by scarlettal

MsITtech, Would this Mad Dog MegaVault? 2.5" IDE/ATA to USB 2.0 drive enclosure work for mirroring (copying everything including the OS) from one harddrive to a new one?

by hal 9000

NB's and HDD crashes go hand in glove they are just bound to happen. But what this generally means is that the NB will no longer boot into your preferred OS but all the Data is still intact on the drive.

What I do in these cases is remove the HDD from the affected notebook and fit it to a USB caddy and then plug it into a master computer and save the data to a HDD on that computer. Sometimes it is necessary to take ownership of the data if you are running Windows XP and this can be done quite easily by following this URL

http://support.microsoft.com/default.aspx?scid=kb;en-us;308421

If the data is encrypted you'll also need to copy the encryption key as well

http://www.microsoft.com/technet/prodtechnol/winxppro/support/dataprot.mspx

But if the HDD has been damaged you'll need some form of Data Recovery Software one of the best is On Track available at

http://www.ontrack.com/Homepage.aspx?id=3&pagename=Software

But there are other less expensive solutions available you can try any of the following URLs for Data recovery Software

http://www.x-ways.net/winhex/

http://www.iolo.com/sr/3/download.cfm

http://www.getdata.com/

http://www.stellarinfo.com/

But generally with any NB you can just read the data off the drive and you don't need any additional software.

Col

by jenkinsqh

I regularly do exactly what you are inquiring about. Our company policy is that power on passwords/HDD locks are enabled. For crashed drives, need to boot back into the bios to disable these features if you all employ them.

Like some of the other poster's have suggested, I use the Datastor USB 2.0 Portable Hard Drive. To do a recovery/restore, I simply take the unit apart, and substitute the laptop HD in question for the HD that came with the Datastor. At least in XP, no software/drivers necessary to use. If the OS in question is XP, then you will need to be logged onto the laptop that you are attempting to pull the files from the defunct HD from onto as an admin.

by toad464

Also if problems reading drive still put it in the frezzer for 15 to 20 Min's then do the same again it has an ability to stablize a dead drive foe a short time making copping data a snap.

Toad

This discussion is closed to new replies.