4 replies
by mwb
Once upon a time there were standards that said crossover cables should be a certain color but even I can't recall if it was green or blue. You can really only tell by looking at the wires through the clear end-connector of the CAT5 cable. Here isa guide that can help you since there are a few standards out there on what order the "pairs" of colors are placed in:
http://makeitsimple.com/how-to/dyi_crossover.htm
Hope that helps.
by landrew
by mcurtis
A crossover cable is essentially a 'null modem' cable for Ethernet. In a standard 100BaseT cable, the 1st, 2nd, 3rd, and 6th wires are used (1 & 2 for transmit and 3 & 6 for receive or vice versa).
In a 'crossover cable', the wires are 'reversed'at the other end of the connection so you get something like
Wire 1 -> 3
Wire 2 -> 6
Wire 3 -> 1
Wire 6 -> 2
It's used for connecting two PCs directly to each other without a hub (the hub does the 'crossover' for you) or connecting a hub toa switch (another type of hub), for example.
Mike
by landrew
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending