Question Locked

Delayed Printing

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I use a Canon TS5100 Series inkjet printer and Windows 10 on a new Asus laptop. When I click the print button the first thing that happens is a message telling me that my printer is offline when it is not offline. The document is printed about five minutes later. Any suggestions?

3 replies

by kees_b edited

- How is the printer connected to the laptop, via USB or via WiFi?
- Did this new laptop still come with Windows 10? I'd think new laptops only come with Windows 11.
- Where did the drivers you installed for this printer come from?
- Does the same thing (5 minutes delay) happen if you use it for scanning in stead of printing?
- Did the same thing happen on your old laptop?

by amcpherson832 edited

Thanks for your response.

• Supplied with Windows10 and free upgrade to Windows 11
I upgraded, had a few problems so returned to Windows 10
• Drivers came from Canon website
• No delay with scanning
• Didn’t happen on old laptop
As I couldn't remember if I loaded drivers before or after returning to Windows 10, I have reloaded the drivers but this has not resolved the problem. I had to use a USB cable to complete the driver installation as the Canon software couldn't located the printer wirelessly even when the printer showed wifi as online

More possible clues - Connection Status Report Presented mostly in red because of mismatches on all but two lines on the Printer Connection panel - Wireless Router Strength and Password for Wireless Router both shown as matches. Another thing I noticed in the Check Connection Status report is that the Wireless Router Standard for the computer is shown as 802.11ac and for the printer 802.11n – is this OK?

by amcpherson832

Another point I noticed in the connection report is that the router is using channel 36 and the printer is using channel 11 - is this OK?

This discussion is closed to new replies.