11 replies
by jstans Accepted solution
by p.j.hutchison Accepted solution
by natelanman Accepted solution
I ran into the same problem with not only Dell computers but HP as well. It really became glaring when I had to set up Dell Desktop computers to send back to a leasing company.
Dell sets aside two USB ports on Desktops specifically for the mouse and keyboard. The ports are along the same row as the ethernet connector. So, try to use these two ports first. Why they do it this way is beyond me, but it seemed to fix the problem I was having.
Nate
by jstans Accepted solution
by gary56789 Accepted solution
by boblockhart Accepted solution
I have a 745 that I configured for a friend. What I found was that once you plug the mouse and keyboard into a USB port woe is you if you move it. Try moving the mouse & Keyboard around and that might solve the problem.
The next thing I need to check is if plug and pray is enabled or disabled which may be the other part of the problem since the drivers are already installed.
by hexigen Accepted solution
We have a domain with a remote management software "DameWare" installed.
While I was having the same problem, what I did is I logged in remotely via Dameware, I'm sure you can do same via RDP and of course I saw that USB human interface drivers needed to be reinstalled...
Don't know what the deal is with that.
by austinpm1 Accepted solution
by seanferd Accepted solution
Then reboot so the driver and configuration get rebuilt.
You might also just run the Detect New Hardware Wizard in the Control Panel.
by hypocycloid3 Accepted solution
by wacas Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending