I support a network of 1900 PCs running WinNT4 without SMS. One technique I worked out might help you if you have the Resource Kit. I've never tested it with an IEAK package but it works with other single-file executable setups I've done. It may sound a little odd, and you won't get any reporting back, but it seems to generally work. No scripting required, just NT commands.
First, you need a list of all your workstations. Run "net view > ws.txt" or something along those lines to get a list. Then you need all your workstations running the Schedule / Task Scheduler service if they aren't already. You can run something like
for /f %i in (ws.txt) do sc %i start schedule
That should get schedule running on your workstations under the System account. Now you'll have to copy your IE executable to all the workstations
for /f %i in (ws.txt) do copy ie.exe %i\c$
or something like that. You can't leave it on the network, since the System account isn't able to access network shares on the domain.
Finally, create an "at" job on each workstation to run the program. I usually schedule these for after-hours. Example:
for /f %i in (ws.txt) do at %i 3:00 c:\ie.exe
You may want to redirect the output of these commands to a file so that you can see if there were any errors.
I've done this and for the most part it gets the job done. The big disadvantage, at least in our environment, is that workstations don't get the package if they're turned off while you're doing all this. Either way, good luck with your installation.
Cheers,
Paul