Question Locked

detailed laserjet error code translations

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
yes,i am a laserjet printer technician and i am wondering if there is anywhere to get the detailed error codes for hewlett packard printers.there is much info about these errors around,yet they are often not a full explanation of the entire error code.for example:a 49 error is generally a firmware/formatter communication error.yet i see many 49 errors that are listed as,49.4c02,49.2f9d,49.ff08 or something like this.is there anywhere to get a detailed translation of what the suffixes after the decimal refer to?like the 4c02,2f9d, or ff08 part.thatnks

6 replies

by mjd420nova

We have purchased the service manuals for some of the units that we service the most. That gets expensive and can lead to a whole library of the most common ones. They do give the complete codes and most are not carried over from unit to unit, that is codes for one are not the same for another. User manuals are worthless to any service person and are often too technical for most users. Some manuals run over $100. but provide complete brealdown and disassembly procedures besides the error code listings. Try HP tech support.

by rayjohnwig

yea,with the service manual error code listings,many of them are kind of vague and don't give a detailed description of the secondary part of the code.some of them will give a course of action , but many of them will say the infamous;turn the printer off,then on,if the error persists contact hp technical support.

the thing i noticed between user guides and service manuals is that often,even though the service manual will have detailed diagrams and removal replacement;it often won't show a full printer menu listing,where a user guide does but don't have the other details.

by megawatts1066

I have reset the board, removed the LAN card, and pushed the 128MB memory back, as it had come slightly loose. It does not have a Hard Drive, fromwhat I can gather, so the 5 messages on the HPsite, have not given a cure.

by robo_dev

Shamelessly stolen from another forum:

1. Power off the printer
2. Power on the printer and watch for the memory count in the display
3. When the memory count appears in the display, press and hold the Menu button
4. When all 3 LED's are on and steady, release the Menu button.
5. Press and release the Back/Exit button
6. When you see INITIALIZE DISKS, press and release the Green Tick button.
If error returns replace the Compact Firmware Module (p/n Q7725-67958 32MB compact flash firmware DIMM module - Version 07.006.0)

http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-color-LJ-4650N-service-error-code-49-4401/td-p/1092504

This discussion is closed to new replies.