Discussion Locked

Detecting 2nd processor

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just receive a dual processor Compaq proliant 1850R server. The system bios detect the 2 processor at bootup, but when NT bootup it can only find one processor.
What can I do to resolve this?

Thanks

6 replies

by mckaytech

You need to install the multi-processor HAL.
The easiest way to do that is with the Compaq Server Support Disk (SSD).

There are some service pack issues so make sure to review the instructions on the SSD.

There is a Microsoft tool called uptomp.exe but even Microsoft recommends using the SSD.

paul

by dc1

You will need to update the HAL for NT. Compaq has a utility on there SmartStart CD's that will do this for you. Other options are use UPTOMP from the NT Resource Kit but the Compaq utility is MUCH easier.

by dash242

Compaq has a HAL update utility. You will need to run this. It should have been included with your server. You should be able to find int on Compaq's site.

This discussion is closed to new replies.