Question Locked

detecting a second monitor for extended desktop

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Well, i only have one monitor output on my vista computer as far as i can tell, so i bought a y-cable and i used that to put my two monitors onto the system. they clone but when i open up the GMA Driver it doesnt have the second monitor detected, it says i only have one. do i just have to install a new monitor port or something? does the y-cable not work for that?

4 replies

by absolutely

Generally, the ability to output on two monitors depends on the video card. I don't know of any 'y-cable' for a display output, except for a KVM switch, some of which are mere cables, and very nice btw, but these are designed to output either of two computers on the same monitor, and be switchable. Maybe this cable you have is a type of hardware I don't know about.

by craig herberg

If your video card does not have two connectors, check with your computer manufacturer to see if they have a secondary video card for your computer. These are pretty inexpensive, if you just want it to extend your desktop -- not so for heavy-duty 3D gaming.

Good luck.

Craig Herberg
http://info-safety.com

by huoml

what you are doing is sending the video output to two monitors. Your computer's video card has only one video cable connected. To have, say two monitor, you will need a video card that has two video connectors (output) or as the other poster suggested, installl another video card and then connect the second monitor to second port on video card. Once you have a card with two video ports or second video card, you will see second monitor option show up in GMA.

hth
-H

This discussion is closed to new replies.