Discussion Locked

DHCP and static IP addrs. on single NIC

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello... here is my question...

I have a portable computer in wich I will install NT or 2000. I'm going to get it connected to corporate and home networks. And here comes the trouble... It needs to have a static IP address for the home network and to be compatible with DHCP for the corporative one.

I know that I can setup a NIC with two static addresses, but can I set up one static addr. and one dinamic addr.

It's going to be a 'technoplegic user computer', there is no way to teach himhow to configure tcp/ip manually...

A way to script the configuration of tcp/ip in order to reconfigure on start up or on a clic over a icon should be wellcome also...

Thanks in advance to all of you willing to help...

5 replies

by peter ritchie

If there's only one NIC you can only have one IP Address.

There are realistically only two solutions to this dilemma:

Allocate (reserve) the static IP for the computer on the corporate network--leaving him off DHCP.

Install some sort of DHCP on the home network--something like Internet Connection Sharing or WinProxy. (My recommendation)

Another alternative--I don't personally recommend because the above are simple tried-and-true solutions--is to install some software like MultiNetwork Manager to manage connections to multiple networks.
http://www.globesoft.com/Common/frm_products.html

by otura

Peter, if you assign them manually you can have as much as 4 (as far as I can remember) IP addresses assigned to a single NIC...

by raffi_

Write two profiles. Call one ATHOME and the other ATOFFICE. In one profile Enable DHCP. In the other assign static TCP/IP info.

If you need help with profiles post a comment.

Regards
Raffi_

by otura

Thank you... I'm so stupid I didn't try the obvious solution... :)

Thanks a lot... :)

This discussion is closed to new replies.