Discussion Locked

DHCP on PPP Adapter

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm running DHCP on my Windows NT 4.0 server. When a Win98 client connects to the network, everything works fine. I do a winipcfg and all the settings (IP, Subnet, WINS, DNS (2 current servers))and 7 day lease information for the NIC look correct. When a Win95/98 client uses RAS to connect to the network, the IP, Subnet, and WINS are assigned correctly to the PPP adapter, but DNS shows listings of old DNS servers (in addition to the current ones). Also, "Lease Obtained" and "Lease Expires" are showing the same date of 01 01 80 12:00:00 AM.

Any ideas why the lease information shows Jan 1, 1980 when using dial up, but has the correct date when on the LAN?

Any ideas why my old DNS servers in addition to my current ones are showing up when using DHCP with RAS but not on the LAN?

Any help would be gladly appreciated.
Thank you.

4 replies

by garetjax

I ran into this recently with our laptops. Check the RAS/DUN connection on the laptops and make sure they are configured to use server-assigned DNS/WINS. The Win95/98 RAS clients have two sections for IP assignment and DNS/WINS assignment.

Inour case, the laptops were receiving DHCP-assigned IP addresses/subnet/router but had hardcoded DNS/WINS.

Hoep this helps.

by matt.wong

Thanks. After checking on the Microsoft Knowledge Base, the lease information on a PPP adapter will always show 010180 12:00am.
For the DNS problem, it turned out that two old DNS address were removed and two new ones replaced them in the DHCP Manager settings. The server was rebooted and only the two new ones were showing.

by terminator

Check Tcp/ip properties on client to make sure there aren't any entries under DNS, or Wins, and it picks its IP address from your DHCP server

Release the ip address and renew them and check if the get the same configuration and make sure there aren't any other dhcp servers runnning and you are not aware of

Good luck

by matt.wong

Thanks. After checking on the Microsoft Knowledge Base, the lease information on a PPP adapter will always show 010180 12:00am.
For the DNS problem, it turned out that two old DNS address were removed and two new ones replaced them in the DHCP Manager settings. The server was rebooted and only the two new ones were showing.

This discussion is closed to new replies.