ok, I understand the problem now. you want to install DHCP on ISA to provide IP addresses to client computers behind ISA.
First gotta deal with ISA. The external interface [the one you directly connect to your ISP] is a dynamic IP address. Thats ok. The second NIC MUST be a static IP address. Clients behind ISA will use that NIC as the default gateway and therefore must be a fixed address. This scope[range of addresses] becomes your LAN. If you install DHCP on ISA DHCPs address is your internal NIC and the scope of the range of IP addresses within that subnet [excluding the static IP address assigned for the LAN NIC]. You have to setup a reservation within DHCP for that address. You then authorize DHCP for that scope. In DHCP you need to setup options for DNS, and Default gateway so that clients have the correct information.[the default gateway for clients is your second NICs statically assigned IP address]. IF you don't run DNS on your LAN, then DNS is your ISPs DNS servers.
Next is client computers. if clients do not have the ISA server firewall client program installed, they are considered secure NAT clients. Secure NAT clients do not provide credentials to ISA server. If there any access policies set that require authentication for access, secure NAT clients will be denied. Best to install the firewall client program on client computers.