Discussion Locked

DHCP server on Windows XP

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Sorry if this sounds like a stupid question, but what can I say:) I have have an application that downloads data from a truck when it pulls into the yard. I am currently buying a DHCP server for the computer we download to. Is there a way to setup my computer using XP Pro to be a DHCP server without the third party software?

14 replies

by carlitosway

Hello,

There is really no tool in XP that has DHCP functions except for ICS (Internet Connection Sharing. From your paragraph I can see that you need a central point of storage. I would go with having a dedicated server to manage the storage of data and also the authentication of users.

Just my 2 cents.

Good Luck

Carlitosway

by bruno fonseca

I think your best bet is to go out and purchase a new box within your budget, load Windows 2003 Server Standard Edition and configure it correctly for DHCP and then you will have a lot less problems. This just looks like a ghetto fix to a problem that will turn itself into a huge ordeal down the road for you.

That would be what I would do.

by alexnet

Linux is free plus the cost of the computer you want to run it on, but if you have an old computer, you can throw 2 network cards in it, load your favorite linux OS, and there you go, you have your gateway, dhcp, dns, and directory system, and (if your ISP supports it) Web Server, all in one box. I have done this many times with the linux distribution SME (e-smith) linux, from the site, http://www.contribs.org It is very easy to set up and manage, and has by far the simplest interface.

by benzesp

Yes you can enable DHCP by usubg your XP resource CD and installing network utilities. I think you are limited to only 5 nodes. Or just but a cheap dhcp router and a switch if you need more nodes to be connected.

by guna

Hi, how i can enable dhcp server on windows xP. can you please explain me the procedure.

by aw_willis

Go to network connections in the control panel and right click on the right on the LAN device that you use and select properties.
From the listed items click Internet Protocol(TCP/IP) and then properties. Select the option that allows you to manually configure the protocols there. Now. . . I'm assuming you can do that. If you are done,click ok. YOU HAVE CONFIGURED YOUR WINXP PC AS A DHCP SERVER.

by aaronearles

That's to configure a static IP, which would need to be done on every computer on the network. That is in no way DHCP.

by lee_a_ward

You really shouldnt try to help if you dont know what you are doing. Leave it to people who understand.

This discussion is closed to new replies.