Discussion Locked

DHCP Servers

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a WAN with 3 locations. One has the PDC, 30 users, a DHCP server, and a Cisco 2600. It's connected to the second via a T1 and a Cisco 1700 that also doubles as a DHCP server for 25 users (at site 2) although there is a BDC at that locationn. The third link is connected to the second via fiber and a Cisco 1700 that also doubles as a DHCP server for 10 users (at site 3). I never see the no domain server available at the first location with the PDC. This leads me to beleive that the routers might not be the best DHCP device. Should I use the BDC at location 2 to server as the DHCP server for locations 2 and 3?

Thanks,
Jimmy

3 replies

by calves

Since you have such nice setting, where bandwith does not seem to be a problem, I would setup a BDC with DHCP and WINS replicating between the two or three sites, that will cut down on authentication time and locating resources on the LAN.

Good Luck!

This discussion is closed to new replies.