Load balancing for excessive network traffic and redundancy in case the PDC crashes are not great reasons for having multiple DHCP servers. High network traffic, in the case of DHCP leasing across a router, will cause relay agent request traffic. Redundancy might be a good argument, but a DHCP scope can be created on a BDC in minutes with the proper scope documentation. On a non-routed small business LAN, even if it’s subnetted, two DHCP servers are impractical and can cause the sort ofconflicts reported unless they are configured correctly.
Please check the list below and see if any apply to the issue:
?DHCP servers don’t exchange information with each other. Make sure that no two DHCP servers’ scopes overlap.
?The DHCP server only acts upon client reservations where the reserved address is part of the available address pool. To avoid conflict create the same reservation on other DHCP servers that exclude this address.
?DHCP servers must all use static IP addresses. Leave some of your assigned IP addresses outside the lease scope and make a reservation for your servers.
?Each NIC on a DHCP server must have a manually configured IP (ISP assigned and/or Intranet reserved). The DHCP NIC IPcannot be part of the leased scopes.
?If you have a routed network, a single DHCP server can service multiple subnets, but only if your routers are configured as DHCP relay agents. The DHCP server can only assign one scope to each subnet.
Hopethis helps. Best of luck!