Discussion Locked

DHCP with more than one scope

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a windows NT based network, with more than 50 workstations. Up to now the addressing scheme is dynamic provided by the PDC wich acts as a DHCP server and DHCP relay. We have also an ISDN line to connect to the Internet. Recently the company ordered a new type of Internet connection based on the ADSL technology. Our new ISP provided us with a new range of IP address that would not match the number of networked devices in the network. Also they provided us with a new preconfigured router.the old range of IP addresses is of course totally different (ie different IPs and different subnet mask.
The existing DHCP server has only one network interface card. I have been advised to configur the Server with more than one IP address and to take advantage of the Superscope configuration on the DHCP manager, but i am affraid it is not as simple as they have suggested. There is the issue of leases, subnet mak, default gateway and so on.
Another thing worth of mentionning is that the ISPkind of obliged me to give a certain IP address to the mail server which will make it just next to the router in the IP order.
Any suggestions? Could you please be specific in your answers.

Many thanks

5 replies

by cisconetworks

The mail server is not an issue simply add a reservation for the hardware address of the mail server. DHCP can have multiple scopes, however the server has to have some way of knowing which scope to use when assigning an address to a requesting client. This is normally done with layer 2 switches. Switches can identify to the DHCP server which scope a client belongs to.

Within DHCP you can use a totaly seperate subnet mask and default gatway. What exactly are you having a problem with?

by barry hensley

You are going to need to configure your network with OFF-NET addresses and implement NAT.

In your current configuration, you don't have enough IP addresses and you don't have any security on your LAN.

I would recommend placing a NAT box between your LAN and the DSL router that your ISP provides. You can use something like the LinkSys BEFSR41 - EtherFast 4-Port Cable/DSL Router. It sells for less than $400 and does DHCP, NAT, etc. Connect this device to the DSL router using Ethernet cable. Place a hub on the segment between the LinkSys box and the DSL router and you have created a LAN in which to place your email server, etc. All devices on this LAN will have real IP addresses. All devices behind your LinkSys box will have off-net addresses and will be protected from the internet.

By the way, the DHCP on the LinkSys box provides up to 253 ip addresses. It's very easy to setup.

This discussion is closed to new replies.