Discussion Locked

Dial up Network ISP Connection!

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have 5 Win98 computers on a peer to peer network. What software or hardware do I need to get to be able to dial up our ISP on demand and have the others access our ISP as needed as well. I want all to be able to access the ISP at any given time. Dial up at 33,000k is our only choice here in the Arctic.
Thanks
Merv
mervt@arctic.ca

7 replies

by gortiz

You have two different ways to go about connecting to your ISP. 1) Use a device from 3Com called a LAN/MODEM, it allows you to connect up to 25 computers on a single dialup. 2) You can also use Winproxy to accomplish the same. Easiest is the 3Com Lan/Modem.

by Member 21361443

If $$$ are an issue, you can use Windows 98's Internet Connection Sharing service, which is added through the network setup area. Or, if you can add another machine, you can use Linux with KPPP and IPCHAINS. But, Win98's Internet Connection Sharing is your best bet.

Brian Lusk

by dmiles

Software
WINDOWS98-It has both the network operating system and the client operating system.
Each computer will need a network adapter cards
Cabling will be needed to connect the computers.Using a crossover cable would be a good choice
Twisted Pair wiring
Network Transport protocols
TCP/IP-Is the protocol of choice for the Internet (it is routable)

by whatme?

I am already networked. Just needed a connection. The first answer...lan/modem is what I was after.

This discussion is closed to new replies.