5 replies
by jmatt
G'Day .
Use TweakUi for that job , also tick all the boxes in the My Computor section of TweakUi . You will gain an extra benefit also , in that you will now have extra features , when you right click on Start . John .
Download Tweakui completewith install instructions from ,
http://www.microsoft.com/ntworkstation/downloads/PowerToys/Networking/NTTweakUI.asp
by paratus10
by jdfcomputer
Here are the procedures step by step:
STEP1: Reboot your Win95/98 system. When you see "Starting Windows 95..." on the screen, hit the F8 key. This will cause the Boot Menu to pop up. Select "Command Prompt Only" and hit Enter. You will soon end up at the C>prompt.
STEP2: Modify your MSDOS.SYS file. It is a read only, hidden, system file. To remove those attributes type: attrib -r -h -s msdos.sys
STEP3: Make a backup copy of your MSDOS.SYS file by typing: copy msdos.sys msdos.old
STEP4: Edit MSDOS.SYS. Now type: edit msdos.sys You will see a section labeled [Options]. Modify the [Options] section and add the lines you do not have as follows (The order does not matter):
BootGUI=0 (This line alone will cause Win95 to boot to DOS prompt only) (Or try these next three or four lines):
BootMenu=1 (This will cause boot menu to always appear on bootup)
BootMenuDelay= 10 (Default is 30 seconds)
BootMenuDefault= Whatever number choice on the Boot Menu you want.
BootMulti= 1 (Add this line if you installed Win 95 over an older DOS (-it will allow you to boot up with the older DOS. It adds an additional boot menu choice)
Logo=0 or 1 (Turns the splash graphic off or on)
Network= 0 or 1 (Again, it dependson your system)
AutoScan=0 OSR2 USERS ONLY-add this command here to stop your machine from running Scandisk on a reboot after a lockup or power outage.
STEP5: Reboot and test it. If it's what you want, put the attributes back on MSDOS.SYS by typing: attrib +r +s +h msdos.sys
by paratus10
by paratus10
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending