Question Locked

Disable onboard video Poweredge 6400

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi There,
I have a PowerEdge 6400 server which has an onboard video controller. I have purchased a better PCI video card so I can use this machine with Second Life.

When I install the card the machine won't boot at all. The fans come on but the monitor never receives a signal no matter which port it is connected to and nothing appears to happen beyond that.

Take the card back out and it starts up fine.

I thought I may have to disable the onboard video card but looking through the bios there is no video settins at all. I have read throgh the manual and (clutching at straws) I hoped to find a jumper setting on the motherboard that would let me disable the onboard video but no luck.

Any ideas on how I can get my big hunk of a computer to boot up with my nice new PCI video card.

BTW the carrd is a Nvidia GeForce 5500 with 256mb ram.

I tried the card in different slots including the one standard 32 bit slot. (Slot 1)

David

4 replies

by hal 9000

Between the M'Board & Video Card Chip Sets. This is very common with older M'Boards and Modern Video Cards as they are way above the specifications that where ever thought possible when the original Hardware was released.

Sometimes you can get the same Chip Set from a different maker to work and other times you need to go to a different Video Chip Set to allow the system to work. I have the same problem with a Video Capture Card which works perfectly on one model of Server Board but locks up everything on a slightly lower version of the same M'Board.

Col

by david.pollard

Hi Col,
I'd say you're right. I guess I was hoping for some magic solution. I have seen this kind of thing before with a new USB 2.0 card in a DELL mother board. With the card in the slot the machine was completely and totally dead. Take it out and it boots up fine. I thought I'd killed the company server.

However I'm still a little supprised at this behaviour with the PCI standard having been around for so long but hey I still remember 8 bit isa slots.

David

by usmc_mario

hello David -

I have the same issue with a different DELL server. Did you ever get a video card to work with your server? I can't even find out how to disable the video adapter in the bios. thanks

This discussion is closed to new replies.