Discussion Locked

Disappearing Start menu Programs list

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are running Netware 4.11 with newly installed client 3.21. Since the new client has been installed, computers installed with new software programs and rebooted loose their start button program shortcut list and are replaced with one showing only the newly installed program/software.
Is there a reason for this plus a FIX

8 replies

by bdgray

it sounds to me like profiles were enabled on the workstations prior to installing the new software. If the profile does not specify that everyone uses the same Start Menu programs menu or copies of the origional Start Menu Programs they will only see programs installed since profiles were enabled. By default they will have Accessories and a few programs like Internet Explorer and the MS-DOS prompt.

To fix this disable profiles on the workstations. Or copy the C:\WINDOWS\STARTMENU folder to each of the users folders in C:\WINDOWS\PROFILES\.

As long as profiles are enable only the user ID that had the software installed will see the items in the Start Menu. Unless you are using NT as a client.

by thatdarnpc

Most machines have been re-ghosted prior to any install and all work fine until as stated a new program is installed then it changes. Logins are still the same except as stated; the program list is changed from what it should be, too showing whatever was just installed. Also this problem only exists in a 2 room area no other machines are effected in this manner on the rest of the network .

So Please I still need an answer for this Problem.

by white wolf

Similar answer as the first - but with a different angle. Did you perhaps download and enable the Novell client with the free Zenworks starter pack? (Zenworks has many options that do the same stuff as the Windows profiles) If so, you probably should perform a rollback (use the Rollback.exe in the novell client), and make sure you set the proper options before you perform the re-installation of the client.

- Good luck!

by quija

You say that this only occurs in a two-room area. If you move the problem workstation to another area, does the Start Menu reappear correctly? Or does the problem, once encountered, continue to affect the workstation?

This discussion is closed to new replies.