They sometimes break one or more connections just near the Plug particularly if it's pulled through a tight turn/bend.
Another possibility with those monitors is that they part way dislodge the Connection where the Video Lead plugs into the Monitor by dislodging the connector from the Circuit Board. That may be repairable if the monitor is no longer Under Warranty but if the Circuit Board has broken or the circuity failed between the DVI Plug and the remainder of the circuit Board as there is all Surface Mount Circuity Involved it's very difficult to do much about repairing the Circuit Board.
I've seen quite a few Acer Monitors fail like that and if there is no warranty involved it's messy. If the thing is still Under Warranty don't touch it just return it to Acer or their Agent for repairs. If you touch it even if told to by Acer they may not honor the warranty. I've heard of that happening on more than 1 occasion.
The limit of what you should try if it's not the Video Lead is clearing the Monitor and resetting it. Try returning it to the Defaults and see if that helps but I would defiantly say do nothing more if it's UG other than getting onto Acer for a Warranty Return Authorization.
Col