It seems to me that the process of booting from the CD
is the problem. For instance, if you have a music CD in
the CDROM and your boot sequence is CDROM then
HD0 the BIOS will look for a boot sector on the music
CD and naturally it won't find it. Then the BIOS will
move on to the next boot device listed in the BIOS.
So test the ability to boot from CDROM. I know that
you said that you changed the BIOS boot sequence to
have the CDROM first. Check it to be sure that it is that
way. Then put your Windows installation CD into the
CDROM drive. Then try to boot. Watch the drive active
light on the CDROM. You should see the CDROM mount
the CD. Then you should notice that the BIOS is
searching the CD for a boot sector. The drive active
light will show this when the monitor indicates that it is
booting the OS.
If that doesn't work then get a known good bootable
CD. Try the Linux installation CD for instance. If the
computer will boot this then the Windows installation
CD has a problem. If neither the Windows installation
CD nor the Linux installation CD will boot and the BIOS
is DEFINITELY set to boot from CDROM first, then the
CDROM drive may have a problem, or both of the test
CDs have the same kind of problem.
Make sure that the CDs aren't dirty or scratched.
CDROM drives read the CDs from the center to the edge
so scratches or dirt near the center would affect the
boot sector.
Please be sure to rate all of the answers provided.
Thank you.