Discussion Locked

Do you think the Floppy will go

0 helpful
148 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

148 replies

by hal 9000

Well while I was waiting for this page to load I noticed an add on the top now like most people I simply ignore these and take no notice. However something caught my eye it was "HELP MY COMPUTER WON'T BOOT" and gues what? It was an add for Windows Xp and Office Xp. Kind of makes you think.

by hal 9000

Well just what I did not expect someone call us names. It seems to me that when people resort to calling others names they really don't have a clue what their doing. Anyway the person in question just might work for a company who builds HOME computers where security simply is not an issue or maybe even a student who has a lot of book learning but with no real practial experience. Perhaps we should investigate this a bit more. Any ideas?

by hal 9000

A really good backup in place and yes it is tape and yes we make at least 5 copies hourly. I still prefer to carry floppies personally on jobs where it is simply impractale to transmitt the data. And just as an afterthought as far as encryption goesjust remember the German ENINGNMA machine of WW2 It too was susposed to be unbreakable. So really given the resources nothing is ever totally safe we just have to get on the best we can and work out excatly what is an appeptiable level of security that still allows the people outside the IT department to use the system.

by hal 9000

Is if we where to remove floppies from most of the computers they would no longer be so cheep and could even get quite expensive. Just like hard drives not too long ago I was asked to look at a computer as the owner wanted a HDD upgrade from the 1.6GB drive he currently had so I suggested a 20 GB drive and he was less than impressed as he didn't need that much space and he thought I was trying to rip him off! It took quite a lot of explaining that it is quantie that dicates price sure I could get him a smaller drive like the 6 GB one he thought he needed but it would be a special order and cost far more than the offered 20 GB one. So if we where to start removing floppies from most computers not only would the real tech's have a problem when something goes wrong but as there was not the demand for these drives they would simply go up in price as fewer and fewer manfactures continued making them. And as for booting from CD's I don't know about where you work but where I work we have very few CD drives in our workstations simply because we don't want anybody installing something onto the system and trashing it. Just think of a bored bank manager in the sticks and I do mean in the sticks over 800 miles away and it takes two plane rides to reach there with on the second one only one service per day because there is not the demand so he installs something like Doom and takes the system down if only in his area at least that stops whatever branches are affected from fuctioning and one of us has to rush out to fix the problem. To me the floppy is far more important than any other form of secondary drive.

by deadly ernest

Yes some are bootable USB drives, but it also depends upon the BIOS of the motherboard, some allow boot from USB some dont.

Eitherway it is an expensive way to go, especially when all you want to pass along is a small file, say a basic text or word document. Floppies are cheaper and you dont mind it being a permanent loan.

by deadly ernest

Yes some are bootable USB drives, but it also depends upon the BIOS of the motherboard, some allow boot from USB some dont.

Eitherway it is an expensive way to go, especially when all you want to pass along is a small file, say a basic text or word document. Floppies are cheaper and you dont mind it being a permanent loan.

by cactus pete

Maybe we should just take away all removeable media from end users anyway. Most of my users' workstation have floppies, but not CD-ROMs. Or we lock them out...

But maybe what we need to do is simply support portable removable media devices more. A BIOS password for connecting the device would sufficiently keep users from bringing in their own, and the techs who need it can still use whatever tools they prefer.

by hal 9000

But I can't actually remember but I was on one of my regular visits to the US So I would imange it was at one of the trade shows on the East Coast but those where the days of 286's and I really can't remember much about those either or at least the more odd ones that didn't use IDE drives but had 2 ribbon conectors and weighed tons. I think that I actually saw one of those drives a few months ago when I was having one of my semi regular clean ups along with some memory that had legs that went into a row of holes in the M'Board. But I can remember that we thought we where getting a bargin if we only paid $100.00 Au per Meg of Ram. It might also have been at one of MS seminars where "GOD GATES" actually adressed us plebs. But if it wasn't ateither of these places I'm sorry but I really can't remember. I can remember him saying it but I thought it funny as we where already using more than the 640K at the time that's why I remember the quote.

by hal 9000

I suspose he'd know best wouldn't he. But just out of courisoty is he still scared of someone pushing a cream pie in his face. But seriuosly would you expect Bill as you call him to own up to that as it was so long ago and the industry has grown waybeyond what could ever be invissaged at the time.

by thamer

I have read your responds to dpetrak's "Just Curious" post ... and I'm now very very curious to know if Bill Gates has actually said it.

Since you witnessed the event when Bill Gates said it (You are the first I know), would you please ... help me with the year when it was said.

When was it said?
a)Middle of 1980s
b)1981
c)1983
d) or 1985?

And ... if you remember, what actually was his words?
a)"Who in their right mind would ever need more than 640 K of RAM?"
b)"No computer program will ever require more than 640 kilobytes of RAM".
c)"No one would ever need more than 640,000 bytes of memory."
d)"nobody would ever want more than 640 kilobytes of main memory"

...........

Your help will narrow down my ... search.

Thank you in Advance

by hal 9000

Any certanity. But I imange it would have been in the mid to late 80's at either a Trade Show or one of MS Briefings or what ever they where called at the time. As far as what he actually said it was something about not being able to imange the needfor more than 640K. Yes I know that DOS had a HIMEM Driver but for the life of me I simply can't remember just how much RAM was being used at the time and is it really important anyway? It was not however the focus of the speach that he gave it was only a very small bit and the main speach was on MS view of the future or something like that I think. After all it was at the very least 15 years ago and the bit about the memory was not really that important anyway. I hope that is of some use to you but in reality it was really so long ago that it is by now nothing more than a moot point. I certianly did not expect the responce that I got when I posted the coment though!

by hal 9000

A P4 1.6 Ghz Intel on an Asua M'Board with a 30 GB Westeren Digital HDD trying to run on a trashed XP Pro OS. And nothing I could do would let me anywhere near the thing all the so called safety features of XP simply didn't work and if I didn't havesome cleverly engenerded floppies I would never have got in and saved the Data on a business computer. The Os however was beyond help and the HD was unreadable until I managed to do some reverse engerining on opening up the mess that had been causedbu a home computer builder thinking he knew all there was to know about computers. It seems that some one fitted a LS120 IDE drive exactly where the hell that came from I really don't know as I haven't seen a new one for years now however this one was new and set to CS while there where no jumpers on the HD. I was told that the problem was the computer was spitting up a S.M.A.R.T. warning of iminent drive failure when power was applied which it was however it didn't end there. But what really got to me was the CDRW and DVD drive on the secondary buss where both set to CS exactly how the hell this ever worked is beyond me but it did for a few days anyway.

by mrafrohead

mbecker,

If you only knew how much trouble you're in;) We wacko's are everywhere...

Hiding in the bushes and behind the trees;)

muwahahahahahahaah

Oh wait, shhhhhh, what's that?

by mrafrohead

The Enigma Machine was unbreakable until we captured ourselves a u-boat with one aboard. We were then able to decode the messages with the machine. Before that point, we were floating down a dangerous river with no paddles.

As far as I know, wenever did crack the cypher of the Enigma Machine. But instead we used the machine itself to defeat the encryption process.

Mrafrohead

by hal 9000

Goes well the boys and girls at Bletchly Park {sorry if its not spelt correctly but it was over 30 years ago that I actually studied it} did actually manage to break the code but only because of human error the SS apparently used the same or similarinitial settings so the Poms built a great big electromechanical thing that could more or less do the same job and at the same time could use the most often used keys. However you are correct it was when one was captured on a U boat but the important thing here was not so much the Enignima machine that was recovered but the code books that whent with it that was the real advantage of what was recovered from the sub.

by tbragsda

Put CD in all the wks, lock them down, no problem.

As for remote sites. I have had to deal with this for most my life. The best solution is a good image system/install system. If the user messes with their install, send them a box in the mail,or with simple instructions can reload image from their local server.

I don't think that the cost of floppy drives would make much difference even if they trippled. If we dont put them in most WKS, then the cost of a handfull of drives for the techs is offset. The cost of a PC is soo small. The cost to the co to manage that PC is whats too high. Haveing tech run (fly) somewhere to fix a PC is nutz.

by hal 9000

However my problem here is not so much a technical problem with your proposed solution as a human problem with my imediate boss as he simply will not trust a bank manager to have any form of access above a slightly elivated user level clerance. We have had nomerious problems with rouge managers and staff "Cooking the Books" so to speak. There is no way known that these people will get a higher level of access to the system. No I personally find it a real pain for jobs like this however I understand the necesaty of the policy and I do trust most of the managers but it is the few who screw with the system who make it hard for the rest of the managers at that level not to mention the IT section. Also there was an instance where a programer wrote a subroutine into his program which diverted a small fraction of a cent on every interest transaction that ended in 1% point of a cent into an account he had created and when a threshold was reached this money was transferred into different accounts with other banks. There where also bombs placed in the program to stop tracking of these transactions in the end it was simply cheeper to let the program run than try to stop this as we where constantly taking the whole system down which really did cost a lot of money and was far in excess of what was being lost. Eventually the program was replaced so that solved the problem but it did leave very little trust of any outside personal who where required. This was at least 20 years ago and I amstill living with the problem.

by cactus pete

In this country you don't have to confess to things you haven't said. The burden of proof is upon those who imply you've said it to provide some sort of documentation - a recording, for instance - that you're lying.

So yes, I do believe that he would have fessed up to it. If for no other reason than by the threat of looking like even more of an ass for trying to cover it up.

by hal 9000

Just to make you happy I will look up my diary entries of around the time when I think {I am only guessing as I really can't remember when it was} I heard this coment just to make uyou happy. But really I think it is a waste of time as the statment at the time was logical it was long before any GUI was even thought of or at least before any serious work was done by MS on a GUI. DOS was the then current OS and a 100 MB Hard drive was considered as almost unfillable by any one but the largest company. The normal HD size of the time was about 25 MB {or there abouts I think}. We where also buying Ram in under 1 Meg packages and again I simply can't remember what they called these sticks but hopefully you will not also deny their existance. It may prove necessary to load a computer with DOS and then look up some of my archived data and personally I don't even know if thats possible on the current crop of computers as I simply have never tried to do this after all why would you want to run DOS when you have something much better. But at least it should be possible to run a fairly modern computer on DOS even if it cant reconise all of a hard drive I will give it a go but it will take some time, so don't hold your breath waiting for a reply. Why are you really so concerned by this one sentence? All I was trying to get across is just how far the computers have developed from the very early days of the PC. And will the date and place of the whatever it was actually be enough for you or will you actually require a noterised transcript of the actuall Speach which clearly I don't have, and what other evidence would you accept? Will it prove necessary to find several people who where at this meeting all those years ago to stand up ina Court somewhere to make you happy.

by hal 9000

I have had a quick look around in the archives and the oldest M'board book that I can find is for a 386SX with a copyrite notice of 1989 so it must have been before this even allowing for the possibility that this M'Board may have been one of the first 386's and the 286's where sold for some time after this and that is unlikely as from my memory the 386SX was a development of the original 386 but as it is so long ago I may be wrong. I simply do not have paper copies of my movements prior to 1989 any longer even my pasport has been replaced twice since then so I have no idea when and where I went prior to 1989. However I never intended to cast aspuresions on Bill as you call him I was only trying to get across it was so long ago I doubt that he would remember the statment particuarly as it was only 1 small part of the speach that he gave and reletavily inconcenquencial at that. Anyway even if I where able to give you a date and place I very much doubt that you would be happy with this as I could not provide a copy of the speach which I never claimed that I could and I certinally did not expect to have to prove to a legal standard any thing that was put here. However I do have some data tapes from that erra that should contain copies of my diary entries but I can't read them as the drive has long since died however if it will make you happy and you have the means I will send these tapes to you so you can look up just where and when I went to various places. It is now so long ago that I do not believe that there would be any data that would have to be secured as after all the PC was then in its infancy and we very rearly had sentive data to carry around as it was simply too bulky. I think there is only personal details like my movements and various letters contained on these tapes but you are welcome to them if you want them.

by hal 9000

Down memory lane. {No pun intended} I do have a serious question for anybody out there who may remember I have a memory module that is a 30 pin Single In Line Memory Module of unknown capacity. It has 3 surface mount IC's 1 of which is branded withIBM 89X8922 1 branded as IBM 047??8? and the last branded with AAA2801J-08 these are pre 386 and I suspose are from an early 286. Can anybody remember what these things where actually called? And where they where used? As for the life of me I simplycan't remember and I have long since disposed of anything pertaining to these very old memory modules also can anybody remember what capacities that they came in? This is at least a constructive question.

by hal 9000

Sorry but there where several words missing from what I actually typed in to what ended up on the posting [maybe I brushed the trackball and took the page off being active any way I don't know how it happened} but what I actually was trying to say was something like this. After own up there was susposed to be these words "as I doubt that he could remember a single line of a speach that he gave as" and it was susposed to continue with "that was soo long ago and the industry has grown way beyond what ever could be invisiged at the time." It is entirly my fault as I did not check what actually appeared on the screen and just sent it off after I had finished typing it in. So again SORRY but what actually appeared was not what I intended and I can see why you got upset. It won't happen again as from now on I will check whatever before I post it. Unfortantly when I look at these things it is while I am doing other things [multitasking] and this is how this must have got through. So just again SORRY!!! but it was never intended to cast dispursions on Mr Gates just to point out that he is actually human.

by deadly ernest

The famous Gates statement about 640KB was made at a trade show and was on the news at the time. However, most people get it a bit mixed up. Bill was asked about the 640KB limit in DOS for immediate use by programs (the rest was known as 'High Memory') and he responded that 640 KB was more than enough for any program to use at any one time. In this he was correct, although much mor RAM was used for caching and calculations there was not a program that actually used more than 500KB of memoery in its actual operation. Even the main frames were using only a few hundred KB for the actual program, the rest was all used in data input/output buffering and volatile cache activites.

This was in the early 1980's.

I can remember when a 386DX 33mhz with 4 MB of RAm and 10 MB hard drive was big stuff. Once you booted the system into DOS and did a memory check you usually had about 500KB of the first 640KB RAM free for running an application.

In those days code had to be exact and very short. Today the hardware is so fast and capable that many programmers are sloppy and we have 'code bloat' in many programs. A perfect example is the way many web pages are written. If you take a MS Word document and convert it to html via either MS Word or MS FrontPage, you can then go in using Notepad and clean up the code by removing extraneous items and reduce its size from anywhere between 25% to 75%. Most web designers today don't bother cleaning up the code. This is just one example.

by hal 9000

Well I think this says it all and it not just me going mad and loosing all my marbles. But was it really in the early 80"s? Thats nearly 20 years ago so obviously I've been working with these things for far too long!

by hal 9000

I am now really interested if anybody actually remberes what the thing was actually called if it was called anything at all other than a RAM Stick? I am only so interested because the dam thing lodged itself in the back on my hand while I was looking through a draw so I want to know how to abuse it properly! I can vagerly remember the things although I can't say for certain if I ever actually used them they are just so odd that it has peeked my interest. Not to mention a bloody great row of holes in the back of one of my hands.

by deadly ernest

Please it was not that long ago, and yes I do mis my pet dinosaur a lot.

Yeah, it sometimes seems a long way back. But I once pulled apart a machine that had memory units that were made from wood, wire and glass (an old IBM mainframe thing). I used to buy 1 KB memory chips for mainframes that were the about 3" long, and they were the latest thing out at the time.

I once used a micro-computer that had 64KB RAM and sued two 5 1/4" floppies, manufactured early 1970, looked kinda like the latest iMac. Heavy bugger too.

by avatarofit

...of technology past....

Bring unto me your ailing 486! Show me your 5.25" floppy! Let us spread a new Gospel...

Newer is not necessarily better. Size doesn't matter. Speed kills! Nice things come in small packages.

Come and worship with me in the Temple of Windows for Workgroups. Drink with me from the Fountain of Obsolete Truth. Turn away from the evil temptations of Lord Gates, God of DeceXPtion.

There will ALWAYS be a place for the humble floppy...as long as there are enough True Believers. It is, after all, one of the Articles of the Faith.

The Avatar has spoken! My humble apostle GuruOfDos conveys his respects and wishes me to bestow many blessings upon you and your workshop. May your processors ever process and your drives spin up according to The Divine Plan!

by avatarofit

The US army, bless them, are STILL today using computers with dual 8" floppy disks!!

And I am still maintaining them! The drives are physically as big as the average home pc!!!

Long live the DEC PDP/11

by hal 9000

Further down the page from eebywater. So it seems that I'm not the only one who remembers the thing although I must admit that the answer is far more detailed than I ever thought to get so whoever that persoon actually is they either have a far better memory than mine {not that hard really} or a very good reference libary. Either way I hope that answers your question to your satisfaction. Now I'm going to get on my walking frame and hobble away before I say anything more that upsets you.

by guruofdos

Ever seen a CP/M machine without a floppy?!! I think not! Now try finding one WITH a hard disk...

And yes...I still have an Apricot Portable running CP/M-86 with Wordstar. One 800k floppy holds the O/S, utilities, Wordstar itself AND upto 120 pages of A4 text! I still say it produces finished docs faster than ANY other computer ever made!

by deadly ernest

Sadly, this is something I can speak of as the company I used to work for had a little museum of RAM units.

The oldest was a thing about a foot square, wooden frame with glass panels separating sets of wires that interlocked. Each layer had 8 wires running right to left and 8 wires running top to bottom, where they crossed each other they seemed to touch (never pulled it apart so not positive if they touched).

next came a series of RAM chips, they were about a half an inch wide and variedfrom 1" to 3" in length. Some had 8 pins sticking downwards from the base, later ones had 16 pins. These varied in size from 1 KB upto 100 KB.

Then as the chips shrunk in size so did the RAm chips. On the 386/486 boards they used some of the older style RAM chips as cache memory chips. These are about 1/4" in width and about 3/4" long.

With the Personal computers they placed the RAM chips on little boards that were then plugged into the motherboard, someone started calling these memory units RAM sticks, as they looked like sticks. The reason for using plug in 'daughter boards' was that the changing chips from chip holders often bent or broke legs off thus destroying the chip, it was a tricky process.

Now we have the range of SDRAM, DDRAM, bubble memory, etc. Most RAM still consist of the 'legged' chips soldered onto a 'daughter board' that then slips into a special holder on the motherboard.

Hope this helps you. And you made me miss my poor dead pet dinosaur again, real friendly fellow he was.

by hal 9000

It was in 1989 that I was up in Tounsville ripping out an old Wang Main Frame and that is now 14 years ago bu8t it only seems like yesterday. I only remember that job because of all the problems that we had anf some of the equiptment that we ran across like 8 x 10" Whinchester drives that where nothing like dust proof with clear plastic covers screwed on I think they where only about 1 Meg capacity to, anyway there where hunreds of the bloody things and then there where the Tape Drives that hadGod only knows how many times had broken the tapes and emptied most of the 1/2" tape into the enclosure. Its funny though I can remember that job very well but I can't remember what type of PC's where on the market 386's I suspose with about 4 Meg Ram and anything up to 100 MB HDD. I actually have an old 25 MB HDD with the top pulled off just to show whats inside the things to any people who ask. It's just when you thing 20 years. It really is a long time but luckely I don't actually work as I really enjoy what I'm doing well most of the time at least and would do it anyway it is more like a hobby to me, thats how much enjoyment that I get out of it but then again theres always the days where don't you just wish you could curl up in a balland hide. Like a few days ago one of my new member staff actually came in and told me I was too old and didn't know what I was doing, its really hard to keep a straight face when confronted with a young pimply faced kid just out of colledge who thinks they know it all and the rest of us are nothing more than left over Dinosaurs who are well past our use by date.

by dcosgrove

I still don't see the reason for floppies. I have never felt that carrying a CD made me stand out, I put them in my pocket or my tool case. More over, why would anyone carry senitive information on the least secure media available, not to mention the most likely to fail. I don't recall ever hearing a story about "sensitive floppies" missing from lab, I have heard of stolen harddrives. Bottom line, floppies ARE obsolete, it just takes a while to completely purge them from the industry.

by dcosgrove

I was actually kind of feeling the same way about you, but I chose not to harp on it. Any major network I have ever worked on has much better means of tranporting information. I don't recall using floppies for more than, say drivers or something.In general, sensitive information was NOT to be toted out of the facility for any reason. People who had the need for such info had VPNs or portable HDs. I would venture to say that if your sensitive info is mainly on floppy, you may be the one whos a bit small time here.

by dcosgrove

I make bootable cd with easy cd creator. They emulat the 1.44 or even 2.88 floppy and create a "ram drive" labled A:. This alows writing and enables far more utilities on one disk. Put this on a mini CD and you cant beat it.

by hal 9000

How doy you run Norton's Recovery tools as they instruct you to insert a certain disk either for Virus Scan or the Dos Utilities. I suspose you could make several CD's but that would defeat the purpose wouldn't it? Any way how would you solve this one a 12 month old HP that won't boot past the Win XP Pro Splash screen with CDRW and or DVD drive connected to computer? They have changed the P/S, M'Board, CDRW & DVD all to no avail then passed the mess on to me. Currently I am backward testing allthe perifials and then will consider starting on the computer proper. The worst thing is without the CD/DVD it works just fine thank you very much and I've already looked in the Administrator just to make sure that there arn't numerious CD/DVD drives installed. The computer reconises the CD/DVD at start up but that's as far as it goes. I've rulled out the M'Board as it sees these bits, I've also tried another HDD and loaded XP on a different machine then deleted all M'Board drivers and put it in the faulty computer and it sets up everything but the CD/DVD as it still won't boot when these are installed but they work on another computer.

by hal 9000

It isn't even a program more like a subroutine that works in conjuction with the program on the LT that I and my staff carry when out in the field REMEMBER this is a WAN not a LAN w as in wide and while I can't actually tell you what it carries I can say it would give anybody super administrator priviliges on the network. These are not required as even semi permant storage solutions they are simply a 1 use only that are copied before some one leaves the head office and destroyed when they return always with at least 2 other senior managmant people present. Now on this network the administrator only has access to a portion of the network and someone else has responsibily for another section so in this way a person is not capable of transfering money from one account to another or from one bank to another or from 1 country to another. These lowely floppies are only used by the tech's as required for the simple reason they are easly destroyed if necessary, They can not be loaded onto a LT because if it was stollen it whould allow whoever stole it total access to the system through the modem in the LT and they are discrete as they are virtually invisible when carried outside where as everything else is visable. Of course this all falls down when you go to an airport and go through a metal dector but I get all my staff to carry a packet of cigs as well in the same pocket so mostly the disks are missed. Now you may be confortable knowing that some unorthirised person has total access to a banks computer system but personally I'm not and for that matter neither are my senior managmanet for some silly unknown reason.

by lordinfidel

Has'nt this discussion been bleed to death?

Granted i've been in the middle of the atlantic ocean for the past 7 days. But god damn, this discussion was old when I left.

And it's still going on?

I'm just amazed that's all. Since I thoughtall that could be possible said was said before I left.

by jellimonsta

You know that scene where there is a glitch in the matrix and the same black cat walks past the door repeatedly? I think all that could and should have been said was said in the first day or so. The funny thing is you and I are still keeping this thread alive right now :)

by hal 9000

Could some one tell me how to perform an Automatic System Recovery on Win XP Pro without a floppy? The computer I am currently working on simply demands one!

by mrafrohead

What I would be afraid of is some chucklehead plagerizing (I can't remember the spelling, though I know this is not right) my work and then I would have to explain to the teacher that is was actually my work.

I tend to have bad luck like this. And I normally lose, even though I was right. It's wierd, and I know, sounds unlikely. If you lived around me, you'd see what I was talking about though. it's just off...

Newho - e-mail and networks, would make me uncomfortable to put my work into, as it would be extremely easy for another individual to access your hard work. Granted, I haven't gone to college, but I've heard the horror stories from some of my friends. I could not imagine spending a couple of months on ONE paper to have some jerk take it and you lose out on it.

Mrafrohead

by hal 9000

Well it's oficial after a 13.5 hour day at the latest MS Partner Briefing today I learnt its probable a good idea to read all there bits and pieces even thoug I would be reading MS stuff for years without doing any work but more importantly if you want to run ARS {Automatic Repair System} you simply need a floppy as it stores the system details and this applies to Windows XP, Windows 2000 & all the versions of Windows 2003. So for at least the next 2 to 3 years until Longhorn comes we will still need the floppy. this time you boot from the install CD but the system details are stored on the good old humble Floppy which is the only way to safely restore a corrupted system. I can already hear the cries of you out there BUT YOU CAN USE THE REPAIR OPTION! Well actually you can't as it simply does not work and if you do try this you will only manage to trash whatever system you are currently working on. So I'll stick to the floppy and get the repair done in a few minutes and those of you who consider the floppy unnesecery can have all the fun of a total reinstall. I'm personally a lasy person and will continue to take the les time consuming option.

This discussion is closed to new replies.