18 replies
by fofa
by jake4313
There is a number of different things to look at but over all no matter what a 10mbps nic on any net work will slow it down to some point. First off if you are running everything at a 100mbps, wires, hubs, nics, etc and you throw a 10mbps nic in the middle the the fastest that the network can run is only 10mbps because of that nic. Now you can speed that back up by useing a switch instead of a hub on the network but it still will not be as fast as a 100% 100mbps network because the switch musttake time to "switch" between the speed. If you have anyother questions let me know.
James
by jake4313
by vladanm
by jake4313
by avachon
by jake4313
by mckaytech
In a non-switched environment, it is true.
When an Ethernet node has something to say, it first listens for other traffic and starts to send when the wire is quiet. It listens for a collision and if one occurs, both transmitting nodes stop and wait for an interval before trying again.
A 10BaseT node will take longer to transmit a given packet and therefore other NICs on the segment will have a longer wait before they can send and this will slow down the network (although the effect will not be perceptible under most circumstances).
In a switched full-duplex environment this is not true because each node can start sending without regards for what anyone else is doing since there are no collisions.
regards!
paul
by jake4313
by duster52
A 10mbp NIC is not going to affect a 100mbp network. The 10mbp NIC will only connect to the network at 10mbps regardless of the speed of the rest of the network. It will only connect to the network if it is connected to a port that supports 10mbps. The network hardware should be able to able to handle the traffic flow. If the hardware (switch or hub) cannot handle the mixed speeds, then you may see some degradation, but the degradation will only indirectly be caused by the slower NIC.
Wehave +2000 workstations, +50 servers, +400 printers all running at various speeds and duplexes. We do not see any degradation in speed or efficiency.
So...my answer is a 10mbp NIC will not directly affect the overall speed of the network.
by jake4313
by dejan
first sory for bad english
it's not true because any 10 Mbps NIC not possible direct to connect to any 100 Mbps network. Any 10/100 hub must have one internal switch 10/100
by jake4313
by saihib
by jake4313
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending