24 replies
by dmambo
I have several friends/acquaintances who have asked me to take a look at their W98 machines in the past year. They use it for web browsing, MS Office, etc and just don't see a need to switch.
In our AD environment, we still have a bunch of W2000 PC's. They usually get replaced by hand me downs at a rate of maybe 8-12 per year. Probably be 2012 before they're all gone.
by jck
by slayer_
Running many 95's and 98's.
Hundreds of them. It's all you need for a dumb terminal machine running RDP into a server.
We have some applications that test our finished products that still run on W98. Two are still on the network.
Edit - These applications were written to match the hardware of the systems they run on. They contain third-party ISA cards we either can't replace or that replacing would require re-writing the apps. These cards also block virtualizaton as a solution. That's what's keeping us from upgrading the hardware and OS. Since no newer versions of Windows will run on the older hardware, we have no reason to see if the apps will run on newer versions of Windows.
End Edit.
The system that controls the building's HVAC runs on W2K.
Edit - Okay, this one just won't run on XP. The hardware will support the OS, but the app craps out. I see no point in virtualizing this just to host it on an newer version of Windows.
End edit.
These are a small minority of the total systems in the building, maybe 10 machines out of 260 or so.
by jfuller05
I was a student-worker in Maintenance and Operations at the community college I attended for my Associate Degree and I believe their HVAC program ran on 2000.
When the new technology campus was built, another computer was put into the Maintenance Director's office to support the new HVAC program for that campus. With that program, you actually had an image of the ducts and fans, not just a little symbol representing the ducts and fans, etc.
by jfuller05
Yeah, I didn't really explain what he (wife's papaw) used his Win98 for, which is his invoice software (I'll have to ask what it is). He prints his invoices from that machine, which also is connected to a Dot Matrix printer.
Thanks for all the responses, I like hearing about things like that. I believe that, while these machines/OSes may not be the latest technology, they can still serve as valid functions for a company.
by nicknielsen
by jfuller05
by nicknielsen
Nobody offers what they want in a prebuilt and I can build it cheaper to boot. What they aren't buying is new POS peripherals to replace the old serial devices, so we're getting usb-serial adapters and a hub for the POS equipment.
They're giving up their old 386-20 with 2 MB RAM and 40 MB HDD for an AMD Athlon II X3 Model 425, Asus M4A78T-E mobo, 4GB RAM, and 2 WD3200KSRTL Caviar Blue HDDs (320GB each). Ubunti 9.04 and their 15-year-old POS software running in a DOS 6.22 VM (we've already tried it - it works!). They have a license for Acronis TrueImage 2010 and want to use the nonstop backup feature to mirror the primary drive to the secondary.
And even with my time, it all comes in cheaper than a mid-line Dell or HP. Gotta love it!
by oldbaritone
There are many old applications written in BASIC that won't run on anything newer than 98. 98SE was the change-over when the NTVDM was incorporated into the OS.
Any program that used the likes of PEEK() POKE(), INP(), OUT() etc just stopped working. Many suppliers refused to update software for older equipment, because they has something newer they wanted to sell.
Options for the customer were 1)Spend a ton of money on new equipment and software. 2)Keep using 95/98, which is running just fine.
Guess which option many customers chose.
by el_gazzítò
Hey man.
Glad to see I'm not the only one out there.
I still use MacOS 7.5.5 running on a Dos Compatible PowerMac 6100/66. :-) That's running Windows '95 on the DOS part.
I also still use my Apple //gs which is running GSOS 6.0.1!
But before I have people calling me a Luddite, Which I aren't by any means. I'm also using a 64 bit PC running XP Pro x64 edition as well as Windows 7 in a VM too. :-)
by thechas
We use:
DOS 3.1
DOS 6.2
Windows 95
Windows 2000
We even have some systems where the OS predates the introduction of the IBM PC.
I still have a box with DOS 6.22 and Windows 3.1 on it.
Now, are any of these used for general home use and web browsing? No. But, they still perform the required function.
Chas
by oz_media
I was thinking, 'yeah I'd probably be still using Win2KPro if my old Thinkpad didn't finally die', still miss it as it sits on a shelf in front of me now.
But then there's Chas; no, not like Maude.
I think Mike (Percy) P. probably has a few running dinosaurs around too. (been so long since he's been around, I forgot his alias!)
by dayen
by thechas
I think the alias you were thinking of is Guru of DOS.
Yes, it has been a long time since we heard from Mike.
Hope his life (and yours) is going well.
Chas
by .martin.
I have a few machines sitting round, although they are rarely used, I still use 'em.
Windows 2000
Windows 98
Windows 95
Windows 3.1
by tonythetiger
on my EEEPC, and I used a Windows 98 boot disk to install it :)
Does everything I want.
by dkeith45
I still have a drive with Win98se installed on it, but haven't used it in a long time... every now and then I take it out, blow off the dust and plug it in my tower for the hell of it, LOL. It was a great OS in its day.
I also have an old Compaq laptop that's a 486/25 with 24mb of ram, a 1.2 gig HD, which is HUGE considering it came originally with a 300mg drive. Hard to believe it cost around $5k when it was new in 1995. It has Win95 on it. I've been thinking of dusting it off too to see if it'll run an old game a friend gave me: Star Flight 2, Trade Routes of the Cloud Nebula. I played Star Flight 1 many years ago and it was great.
by hal 9000
That was 9 years old for a client.
However I still supply DOS and support a swag of CAM Machines which run on a DOS platform. These are less than 5 years old and will be in place for at least the next 10 years or so and probably much longer as it takes the best part of 6 months to remove the existing machines and replace them then get the Plant up and running again.
I think that the smallest unit here has a 40 Foot bed so they are not easily portable and needless to say extremely expensive.
There are a multitude of other Specific Devices out there which use a lot of what are now considered as Obsolete Software. For instance one program used by Earthmover's runs on NT4 and nothing newer. As it saves the people who use it a lot of money and the company who developed it currently has no plans to port it to something newer in the way of an OS it too will be around for a very long time to come.
Col
The guy a couple doors down from me retrofits machinery like that.
A horizontal boring mill, for instance, that took two eight-ton forklifts working in tandem to maneuver.
Goes from NC to CAM. Has shelves and shelves of motherboards, and other foreign stuff.
And, I still have my first valid CD of W95.
by dayen
by hal 9000
Well actually stuff earlier than that. Though since I started using PC's I don't think I've thrown any software out and I've actually bought quite a bit of the really strange stuff when I've seen it in shops selling second hand stuff.
I've got [b]SWMBO[/b] so well trained that if she sees anything different she buys it for me. I might not use it much but then again it doesn't take up much room till you move. :_|
But there are some very interesting bits of machinery out there and they are fun to play with. ;)
Col
This discussion is closed to new replies.
Trending Software posts
Sort by Trending