11 replies
by rickh9
Not only will using Intel nics not negatively affect performance, it's likely you will be better off.
We use 3com switches and a combination of 3com Intel and others for our hubs and nics. It has been our experience that 3Com has some reliability problems regarding noisy chips and auto negotiation.
At least in our case Intel nics, both server and workstation types, have performed flawlessly. Of course if your Intel pro cards are 10T only then you may want to upgrade them to 10/100 types.
by gazza7
by mckaytech
I would be very surprised if anyone could actually produce any data showing that a 3Com switch works any better when used with a 3Com NIC.
Overall, I've had better experiences with Intel and clone NICs than I have with 3Com, regardless of whetherI'm connecting to a 3Com switch or a Cisco.
paul
by gazza7
Here's your answer:
There will be no difference in wire speed between a 3Com NIC, Intel NIC, LinkSys, NIC, etc. However, there are some differences between the NICs that you must consider.
1. 3Com has consistently developed better performing NICs than most other NIC manufacturers. Things like Parallel Processing and management capabilities add value. Parallel Processing doesn't cause the wire speed to be any greater, but it takes a certain amount of load off the client workstation and allows a more robust communication between a client and a host. It is 3Com specific but does NOT require the use of 3Com hubs or switches.
2. 3Com has some pretty cool management tools for their hubs, switches, NICs, etc. If you use these tools, you will want all of the devices on your LAN to conform. Tools exist to monitor the performance of an individual NIC in a PC. It's very convenient to use one set of tools to manage your hubs, switches, and NICs. You can also implement Wake on LAN if you choose.
3. 3Com has developed some bonding capabilities and fail-over cabilities into their drivers that support a 400Mbps link between a server and a 3Com switch. Or, you can use this capability to install 2 identical NICs in a server that automatically fail over to each other if one of them stops working.
So, the bottom line is this: wire speed performance is determined by standards. But, individual component performance can be enhanced through technology. LAN management can be simplified through tools, and some proprietary functionality can be achieved by using components from a single manufacturer.
by gazza7
by jolly roger
by gazza7
by pdpjp
No it should not affect the performence fo the network. BUT I have found that if I use components from the same vendor it is easier to configure a system and troubleshoot when a problem occours.
ie: I don't have to deal with Tech support from one component trying to pawn off the problem on another vendor's component.
In your scenario, you already have NICs in place, so it would be wastefull to replace them with 3COMs. In the future, I would just add 3COMS to any new systems that will be added to the network.
by gazza7
by gazza7
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending