Discussion Locked

Domain Controller oddity

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
NT 4.0 Network with 3 servers. Server A is PDC, B is BDC, and C a Member server. It is decided to replace B with a new system (D)which is to become the new PDC. PDC is transferred to B and D is installed as a BDC and then promoted to PDC. Everything seems to be fine, except A is confused. If you open Server manager on A, ie, it says it can't find a PDC and lists D as a BDC. As a result, you also can't adminster the domain from A. Any great ideas on rectifying situation? I have tried synchronizing the Domain

10 replies

by dc1

Transfer any needed data and services off of Server A and shut it off. Synchonize the domain and rebuild server A as a BDC.

by wpatrey

You can't have two PDC's. What have you done with Server A. Has it been rebuilt? Is it now a BDC?

by wpatrey

Let me be a little more specific. If you promote a BDC to PDC you must also demote the PDC to a BDC if it was offline etc when the promotion occured. Also try:

NET ACCOUNTS /SYNC /Domain

to sync up the whole domain.

by 93961

From your query it seems that you have not promoted the M/c B to PDC properly. While promoting one M/c to PDC the original PDC is automatically demoted if it is done online. It seems you promoted B to PDC offline. First of all what is the necessity to promote B first and then promote D to PDC. You can promote D to PDC without this intermediate procedure. You should have simply installed the M/c D as BDC and then promote it PDC while the M/c A was online and here the A will be automatically demoted.
Actually to promote any M/c to PDC in a domain all the domain controllers (BDC & PDC) should be online so the synchronization will take place automatically.

by rcoolman

OK, just for everyone's satisfaction 1. No It wasn't really necessary to promote B first, 2. All machines were online at time of promotions, so appropriate demotions should have occurred automatically.

This discussion is closed to new replies.