Discussion Locked

DOWNLOAD: 10 common Cisco VPN problems and how to resolve them

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

http://downloads.techrepublic.com.com/abstract.aspx?docid=270209

After you take a look at this download, please post your feedback, ideas for improvements, or further thoughts on this topic.

Thanks,
--The TechRepublic Content Team

2 replies

by arche179

Site is blocked by my company - anyway to have an alternate download site?

Been experiencing lots of issue with Cisco VPN since the company parted ways with another VPN client. Many issues with Cisco, some are due to the fact that users are trying to "test/connect" while on the network. Some are with failed installations. Most of the issues are with user trying from home getting, ie, 412 errors.

If by any chance, could you send the file to me via email.

Thx

by s.poojary

Dear Sir,

I have configured the cisco 3005 VPN concentrator. authentication is through radius server It is hitting the raidus server and I am getting event on radius server"User shridhara was granted access.
Fully-Qualified-User-Name = ticb.comp/IT USERS/Poojary Shridhara (Mumbai -I.T.)
NAS-IP-Address = 172.17.137.29
NAS-Identifier =
Client-Friendly-Name = VPN
Client-IP-Address = 172.17.137.29
Calling-Station-Identifier = 123.239.118.177
NAS-Port-Type = Virtual
NAS-Port = 1011
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = allow into the network
Authentication-Type = PAP
EAP-Type =

In VPN client It is prompting me for login and after entering the password it gets disconnected.

On the concentrator the event is "
509 07/21/1999 21:48:12.310 SEV=4 IKE/167 RPT=6 123.239.118.177
Group [vpnusers] User [shridhara]
Remote peer has failed user authentication -
check configured username and password"

Please help me on this issue as soon as possible.

Regards,
Shridhara

This discussion is closed to new replies.