OK for the [b]Bad News[/b] unless you have the lower FAT 16 Partition you [b]Can Not[/b] compress the drive with the Drive Space Utility supplied with Windows 98. If you have a FAT 32 Partition this option [b]Is Not Supported.[/b]
There are some third part Disc compression tools available for 98 though I've never personally used one so I really can not give you any advice on them. If you have any USB Ports on the computer I would pickup a USB Caddy and place a HDD into it and backup all your data to that.
If you don't have any USB Ports you can always fit a USB to PCI Card and that should give you USB 2 Ports, again I've never actually tried this with a 98 computer but I do know that every USB Card that I've ever bought has had 98 Drivers included but I'm not sure at what speed that they will perform at under 98.
The only other option left open to you is to Clone your existing Drive to a bigger one and replace the existing HDD with a Bigger one being SCSI there should be no size limits imposed like there are with an IDE because of the BIOS which has an upper limit on the size of the drive that can be fitted.
Of course if you have a NB you're in real trouble but even then you should be able to use one of the PCMCIA Ports with either a USB or Firewire Card and run the external HDD off that card.
But always try to get a External Caddy with its own Power Supply so it isn't taxing the computers PS and running the risk of burning it out by overloading it.
If you can a Firewire plug in card is faster and the external caddies are about the same price you can even get ones that accept both USB & Firewire so if speed is your main preference the Firewire option would be the way to go. It would always be a good idea to at the very least have a Image of your current HDD as they can & do fail and you do not want to be in a position of loosing everything if this was to happen.
Col