Discussion Locked

Drive Letters Change

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running Win XP Pro. For several months my drives were configured like this:

A: floppy
C: hard drive
D: hard drive
E: USB hard drive
F: hard drive
G: DVD burner

**About** the time I installed some automatic updates (unfortunately, I don't know if it was right after or if this is a coincidence) my USB drive and DVD burner swapped drive letters.

"Odd," thought I, and I swapped them back using the Disk Management Console. Great...until I rebooted -- they swapped back again. No matter what I do I can't get them to stay the way I want them -- as soon as I reboot, they do their own thing.

I have even deleted the DVD burner from the Device Manager. When I re-boot, XP detects the "new" hardware and installs it -- as drive E:, moving my USB drive back to G: AAAAARRRGGHHHH

Unfortunately, I really need the USN hard drive to be drive E: Am I missing something here?

15 replies

by house

The USB drive acts as a device that is mounted after your os boots up. I'm no expert on USB, but try to set the boot order in the bios to floppy - hd - usb - cdrom/dvd. I am actually surprised that you were able to keep the configuration initially.

If that didn't help -
Run regedit...
HKEY_LOCAL_MACHINE\SYSTEM\Mounted Devices

What you do to the registry in here is your own decision. If you're gonna play, don't forget to backup "System State".

by gmusgrave

1. In my BIOS I can completely remove the CD/DVD drive from the boot list -- no difference.

2. Removed all entries and let OS rebuild them -- no difference.

by thechas

I am a bit surprised at the behavior. All of my assigned drive letters are sticking.

Here is what I would do:

Open Device Manager and remove the USB drive.
Dis-connect the USB drive and shut down your PC.

Boot up.
Change the DVD burner to the drive letter you desire.
Re-Start the PC.
If the drive letter assignment sticks for the DVD drive, re-start again.
Connect the USB drive and Windows should assign it the first open drive letter.

If not, next step:
Follow the above procedure except,
change the DVD drive letter to a higher letter such as "R".

If that still does not work, it's time to look in the registry.
CAUTION: Improper use of regedit can cause your PC to not boot.
It is "best practice" to back up the registry before editing.

From the Run box on the Start Menu, open regedit.
With the root folder selected, click on File, Search.
Enter the term E: into the search window.
If you come across keys that reference anything other than your USB drive, inspect the key closely.
As needed, edit the key to show G: for all actions associated with your DVD drive.
Press F3 to continue searching

Once you are done with E:, search on G: and make sure that none of the keys refers to your USB drive.

You might also want to run msconfig and make sure that none of the Windows legacy files have references to E: for the DVD drive, or G: for the USB drive.

Chas

by gmusgrave

1. Powered down, disconnected the USB drive, powered up. Used Device Manager to re-enable the DVD drive (I had it disabled so I could use my USB drive). Voila, it appeared as Drive E:. Used the Disk Management Console to change it to G: (also tried various other letters). Worked fine. Powered down and then up -- DVD is back to Drive E: again.

2. Went through the Registry and looked at all keys with E: in them and they were either things like "filE://....." or referred to files on my USB drive when it was drive E:.

by willcomp

Like Chas, I haven't had any problems maintaining drive letter assignments in XP. However, I don't have any USB drives other than pen drives and it's OK if they just add on after last letter.

Here's a long shot, but won't hurt to try.

Assume that you are logging onto XP as a user with administrator rights.

Set configuration as desired in Disk Management. Log off and log back on as Administrator. Check drive assignment and reset as needed. Then restart and see what happens.

Dalton

by gmusgrave

I can log off and back on, and the drive stays where I reassigned it using Disk Management, but as soon as I re-boot (or power down/up) it switches back to E: again. It is really, really determined to be drive E:!

by quaint_data

put that other answer in the too hard basket dont know why everyone always wants to hack into the regestry.., simpler go to control panel.
administrative tools>computer management>disk management>

here you can see your drives by rightclicking you can change there drive letter. you may have to change one to L or something so that you dont double up and then just rename each to the order you want do be careful though.
If your mainboard has changed a drive letter after an upgrade there may be other problems. You can use the bios to detect all your drives.
Have you checked that ide cable connections and which drive has slaved setting that pin on the back of each. Master IDe on the mainboard is usually blue and the master ide is the first..
Hope that make it easier for you..

by gmusgrave

The drives are connected as follows:

Master IDE: 0(MASTER)=hard drive C:, 1(SLAVE)=hard drive D:
Secondary IDE: 0(MASTER)=DVD burner, 1(SLAVE)=hard drive F:

BTW, before I added hard drive F: I had a second CD drive connected to where it was. Ran this way for some time with my USB drive happily at E: and the two CD drives at F: and G:

I tried changing hard drive F: to some higher letter, and it doesn't solve the problem. Hard drive F:, BTW, **stays** assigned after re-boot -- only the DVD drive insists on grabbing the drive E: slot!

by gmusgrave

I found this article elsewhere on TechRepublic:
https://www.techrepublic.com.com/5100-6270-5034229.html

It alludes to the fact that Microsoft is aware of a drive letter change problem in XP, but the suggestion refers to installation of XP and my problem cropped up long after XP was installed. I couldn't find any reference to this issue at all on Microsoft's site.

by willcomp

Some added info in comments. Did this start immediately after you changed from optical drive to hard disk on secondary slave?

If so, may have some more thoughts on the matter if I can get my brain in gear.

Dalton

by gmusgrave

No. It worked for several months after any hardware changes. The only thing that I can think of that changed was a Windows update around the time of the problem -- but that could easily be a red herring.

by rindi1

I'd not swap the drive letters for these devices. Try to set the dvd to something completely different, like X: or Z:. Do those settings get remembered? You can try something similar for your USB drive.

I always prefer high drive letters for removable devices, then they don't interfere if I add harddisks and there's a system to the drive letters. Something you should also take into account is your burning software. These often install drivers like directcd etc which get loaded on startup and which may influence the drive letters.

by kenzeitak

What to do when Disk Manager assigned drive letters change back after a reboot?

SOLUTION!

I have made a simple script you can run as autostart every time that configures your drive letters using DISKPART. You will need to modify settings using the instructions provided in [I]readme.txt[/I] but it is fairly simple. You will need to reboot and check your Volume ID in order to assign your desired drive letters.

There are no real solutions for this problem in Windows XP that I know of except from having an invisible batch script run it automatically. This solution only takes about 10 seconds to perform and won't overall slow down the normal boot.

Download Instructions here:
http://kenzeitak1.1go.dk/?p=65

Good luck :) Hope this helps!
Regards

This discussion is closed to new replies.