Discussion Locked

Drives detecting problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

sir!
i have a intel(D815EEA) board and 733MHz processor and TWO Hard drivr both are 20GB and One hp CD-Writer.I made a primary hard drive witch has windows2000 O.S and Secondry slave has windows98 O.S and hp cd-writer made as secondry master.My problem is that when i trun on my computer Two drives detect Out of three sometimes both hard drive are detected and HP cd-writer Not detect and sometimes Hp cd-writer and primary master drive are detected and Not detect to Secondry master, sir please solve my problem with your experience.
Thank you

2 replies

by dmiles

Chefck the connectors on the back of the drives and make sure they are secure,then I would change the hard drives to mstr/slv on the primary
controller and set the cd-writer on the secondary.

Try the above first,if this does not fix the problem then I would look at the motherboard site to check for bios flash update.

This discussion is closed to new replies.