Discussion Locked

dual boot

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 98se and w2k on dual boot.. 2 partitions 98 on one w2k on the other.. when booting 98 it sticks on splash screen but w2k works fine.. any suggestions?

10 replies

by dmiles

This could be another WIN98SE bug,check to see if you have any hardware conflicts,most importantly the adapter.You did not mention if you were receiving a error message,so this may be another one that can be looked up at the microsoft web site to check for SP.

by sgjr

Boot to Win98 and hit F5 to get the boot menu, then select command prompt and check the bootlog.txt file on the root of the drive with the dos editor, the last statement is where it's hanging. I know this doesn't solve your problem but it will tell you where it's hanging and then you can do more investigating.

by protomatter

On boot choose your win98 installation and then press F8 to pull up your boot options screen. Then choose step by step confirmation. As the system boots up you will be asked whether or not you want to load each driver and program that is loaded on anormal startup. Answer yes to each, and note which one causes lockup when you answer yes. On the next boot, answer yes to all except that one, just to be sure.
Knowing this you can go on to solve the problem by uninstalling the program/application/driver causing the lockup.

by shawnyong

You never said are you able to bootup to safe mode? To bootup to safe mode, press F8 when you see the "Starting Windows 98".
If you are able to boot to safe mode. that means one or some drivers are not right. Check the Display setting. if it is ok.check on Device manage to check on the Device status.

This discussion is closed to new replies.