Discussion Locked

dual boot setup

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just purchased a new dell dimension 800mhz pentium III with 128megs ram and 30 gig HD running win98. I also have NT 4.0 workstation and would like to setup dual boot. How do I set it up to dual boot? I have partition magic v5 to partition but I'm not sure how to do it. I know I need to resize my primary partition to under 2 gigs and convert to fat 16. what happens to all the extra space on my HD and can I make it all into just one more big partition? thanks for any replies.

9 replies

by drobert32030547

You will need to firstly format your drive with fat 16 then install win 98 and then install NT. When you install NT you will automatically be set up as a dual boot. Do not use partition magic to partition your drive as I did and lost everything. If you want a partition just for NT then create this by setting up a partition with fdisk before you format the Hard Drive.

by dmiles

Using kpartition magic determine the size of the partitions,use fat16 file system to set up the dual boot,install win98,then install winnt4 on the other partition,you can use the space to partition your drive to have the operating systems and use partition for your system files and application files on seperate partitions.You can convert the partitions to fat32 and ntfs after you complete the install.
Reference www.microsoft.com/dualboot/knowledge/tech
for futher answers

by pca barry

One alternative here is to upgrade your NT version to Windows 2000. This new version of NT supports Fat32 so you can leave your hard drive as is.

In either case make sure you have win98 installed prior to installing NT. During the install it willask if you want to upgrade to this version of do a new install. choose the new install and NT will automatically setup your system as a dual boot. Hope this helps.

by eyek

Partition the hard drive into two partition. A primary partition which contains your Windows 98 and extended partition. Make the primary partition to be the active partition.
The PC will automatically assign drive letters (Primary with C: and Extended with D:). Install your new OS into D:. After installation, your boot.ini will automatically updated. Good luck.

This discussion is closed to new replies.