Discussion Locked

dual boot system

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have customer who is running windows 98 on a pentium II 350, how can he mirror his master drive so that if one drive goes bad he can reboot and use the other drive?

9 replies

by saxman642

Here's my suggestion:

Backup your most important files on the disk to an external disk.

Pratiton the hard drive into 2 logical drives and format them.

Install Windows and other applications on the Master drive.
Do the same for the second drive. then copy all you importan documents on to the master drive, Regularly backup to the second drive

This should work. If the first drive crashes then you'd manually boot from the second drive Through DOS. But I'm sure that someone else can explain the booting up part of it better than I can... good luck!

by fred_e944

The only way Win98 (or NT workstation, for that matter) can have a true mirror set is with a hardware RAID controller.

You can ghost to a backup drive as a backup, but recovery will involve physically changing the drive cable from 1 to the other (and possibly changing jumper settings on the drive), and recovery is only to the last ghost operation.

by james_randy

I suggest that you install a second hard drive. With one drive partitioned, you still run the risk of losing all your data if a hard drive failure occurs ? including the backup data. Install a second drive, it will be defined as D-drive. C-drive will be your primary drive, while D-drive is strictly a back-up drive. There?s a software called ?Drive Image? that is very inexpensive (around $40-$50), and is very simple to configure and run. It will back-up onto D-drive an EXACT IMAGE of C-Drive. Inthe case of a C-drive (the primary master) failure, all you?d have to do is go into the BIOS and select D-drive (the primary slave) as the boot device. So in the matter of an additional one minute, the user is up and running again ? no tapes to ?restore? from, etc. If the user runs this very simple back-up procedure at the end of every day, the worst that can happen is you lose one day?s (or less) data. I know this works because I do this very thing with one computer in our office. I would, however, format the drive and load the OS on this new drive from scratch ? as the primary C-drive ? on the same machine. A quick switch in the beginning would accomplish this. But after that, no switching cables or anything. By the way, you do maintain an ?off-site? backup, don?t you? (In the case of fire or theft)

by aronya1

I agree with jr_IT_guy, but would add 2 comments:

1) I'm not sure that all BIOSes will give you the option to boot to the secondary drive, so your user may still have to switch cables if his primary drive goes down.

2) Win95 or Win98 will not install to a secondary drive without using additional software such as System Commander.

This discussion is closed to new replies.