Discussion Locked

Dual Boot Win2000 and NT4

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I have Win2000 already installed on one partition, can I install NT4 on the other or does NT 4 have to be the first OS installed?

5 replies

by nccmbc

Using the full version of Partition Magic that includes BootMagic, create a second NSTF partition within the 2Gb boundry, and use BootMagic to control the boot procedures.

Using this software is the safest way to go about dual booting (I only recomend doing it if you have the program, it's the best and most importantly, the safest), especially if you only have a single physical hard drive. It gives you extensive instructions and wizards to aid you in the creation of bootable partitions. I used it myself for creating my quad boot system (Win98, second version of Win98, BEOS and Linux)

Always back-up your important Data when performing these procedures, especially these. Mistakes do and will happen.

by alan

According to Microsoft, you can have both Win2000 and NT4 on the same machine, however the order of installation lists NT before 2000. As noted in answer 1, NT has that first 2GB requirement, but I'm not sure that 2000 has this same restriction. If possible, use 2 separate disks & you can avoid this. Another good boot manager that I have used is V-Communications Inc System Commander. As in answer 1, backing up before proceeding cannot be overemphasized.
--alan

This discussion is closed to new replies.