Discussion Locked

DUN freeze up

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My PIII-700 with an AS P3 440BX chipset totally freezes up after starting DUN. I can have all other internet related programs disabled, just DUN running and it still freezes up.

I've changed modems, put it on different phone lines, and nothingchanges.

I have a NIC running NetBeui protocol as well.

Any answers out there? Thanks!

10 replies

by coldman

Is your DUN using TCP/IP?
If not, change it to TCP/IP.
Use only TCP/IP if you are dialing to the internet.

by lazyvanbee

You have a TCP/IP conflict with NIC and DUN
Check in Network the settings for client for microsoft networks TCP/IP is set to dhcp and bound to client, also that client is the primary logon. Have you tried disabling the NIC when connecting, this will also show if there is a conflict. Do not do anything in network without your OS disk. Luck

by lazyvanbee

Have connection setin dun properties to your modem, If this fails you will need to delete dun and uninstall your dial up networking then re-install after rebooting, you may also need to remove your network settings and reinstall. Only do this with the OS disk at hand.

This discussion is closed to new replies.