If its a new DVD and an original it should not matter whether you play it on your Computer DVD-ROM or your home DVD player. The copy protection should also not matter. The copy protection is to prevent making a copy and playing it not to stop you playing it legally on any player.
The cylic redundancy error normally points to a scratched or faulty DVD. If this is an illegally copied DVD it may have been burnt on poor quality media.
ie
A "CRC" error is most often caused by bad media - it could be any of the following:
1. A dirty disc,
2. A scratched disc
3. A poor quality disc (cheap media if it happens during the "Burn" section of your work)
4. A bad disc from the Mfgr.
Cleaning
Here are some other little "tricks" which may or may not help -
The "Magic cleaning" technique: Try cleaning your DVD discs. Yea, I know they're new and clean but do it anyway. Do it a few seconds before inserting it into your DVD tray, use a disc cleaner, eyeglass cleaning solution or 99% Isopropyl Alcohol and a soft cotton cloth and rub-a-dub, dub. As soon as you're finished, "Pop" it into your DVD tray and fire up your program
Begin by playing your DVD with your PC?s player. Play for two or three minutes then open your DVD Shrink, DVD X Copy or your weapon of choice - as soon as you begin your rip turn off your player so it doesn?t interfere. The playing before hand is only so that your ripping program can ?Find? your DVD.
"Dr. ScubaPete's, too cheap to buy the professional stuff, Recipe Book for Scratch Repair."
To help with those small "Kiddie Scratches" on your DVD's -
TO BE USED AS A FINAL RESORT to retrieve scratched DVD's.
Materials needed:
A soft cotton cloth
Toothpaste w/Borax (Arm & Hammer may be added)
(Brasso metal polish may be used as a substitute for toothpaste)
Isopropanol Alcohol
Pledge
Glass
Ice
Orange Juice and Vodka
Method: "If this doesn't work it's into the "Circular File" (an Americanism meaning "T