Discussion Locked

Dynamic IP for VPN

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi. How do I set up VPN using a dynamic IP?

5 replies

by calves

VPN works with DHCP. I find that if you not have your ras server setup on the same machine as the DHCP, that it will work better with the IP Forward turned on and the DHCP relay agent installed.

For more info on VPN, you can come to my webpage at www.softsolutionsconsult.com and select VPN. There is a lot info that can help you understand VPN.

Good luck!

by jyimcse

Assuming NT Server and Windows 98 Client.

On Server, enable DHPC, Setup RAS to allow remote clients to request a predetermined IP address. Go to network properties | Services | RAS Properties | Network Tab | TCP/IP Configure Tab | Check the box.

On client, Setup VPN in windows setup | Create DUN entry | Go to Properties | Server Types | TCP/IP Settings | select server assigned IP address.

Good Luck

This discussion is closed to new replies.