6 replies
VLAN1 and VLAN2 will no longer:
-Be able to see or access each other (without a router).
-Receive each others bcasts, so bcast Nebeui node types will fail, hopefully you use a WINS server. But that would be OK unless the two VLANS have to access each other.
All other network traffic between clients and servers will be ok.
by goatts
by ksmith
I'm assuming that you will be using a router to route traffic from one VLAN to the Other.
If you are using DHCP on both segment but only have one DHCP server on one of the segments you will need to configure your router to allow those DHCP broadcast to be routed through your router. Depending on your router, Cisco and Cabletron will use an IPHELPER command.
You might need to configure your router to allow other types broadcast traffic to be routed, ie. Remote Control software, Antivirus update software
I hope that helps...
Ken
by goatts
by goatts
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending