Linux

Ask something
Discussion Locked

efone services

0 helpful
6 replies

by jaboy78 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

whenever i start the ./eFoneSerial -i ttyS0..
It runs fine but in the messages..theres error..

GSM_get
_SMS: No OK was found in the output of the modem. Modem output > <.
getTranjsaction: GSM_MDM_ERR_READ (STATE_LOGGED_ON_READ_ONE)

it repeated few time then
./eFoneSerial: Let's get out of here. :-)

Why?? but ppl can receive messages b4 the ./eFoneSerial stop..

Please help

6 replies

by nico baggus

First try to find out if baud rates match...
Use minicom or kermit to try to access the modem
(if it HAYES compatible...) enter AT
It should respond with OK
If not it can be garbage (wrong baudrate)
or nothing.. (also wrong baudrate, or maybe the
modem was told to not echt and not shouw result
codes....) please consult your manual for the
exact commands needed to reset those..
Hayes: ATE1 or ATE0 should configure echo.

kind regards,
Nico

by nico baggus

Because the interface is dropped when you stop
the driver the modem might execute all
outstanding commands. ...

by jaboy78

the baud rate is 9600
iam using Siemens M20 modem
Why the ./eFoneSerial stops by itself?

This discussion is closed to new replies.