Discussion Locked

Error 1601 Heat Sink in Proliant ML330

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello :

I have a problem with a Compaq Proliant ML330, the CPU fan doesn't work, I change it with part num. 202350-001 but I get the same error code 1601 and the server reset it self again. I need to deactivate the BIOS function that checks the fan CPU function. Please some Help !!!!!

2 replies

by mjd420nova

Error 1601 is a hard drive failure code. Most
often the DMA card or chip on MOBO has failed.
these types of failures can cause crowbar
activation in the power supply. Usually the
drive is bad and knocking down the 12 volts.
Sometimes on power up, cold boot, you'll
notice the fan tries to turn initially but
stops. The power supply could also be at
fault.

by sadasd

This "site" Tech Republic is the SHITIEST on the web. A bunch of moronic idiots wich are a disgrace to the REAL Tech guys. I'm a IT guy.
Never come back here !

This discussion is closed to new replies.