Software

Ask something
Question Locked

Error message

0 helpful
9 replies

by tom_housden2k8

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Why do I get an error message saying 'some processor performance power features have been disabled due to a known bad fimware problem' sometimes. I have a ASRock ConRoe 1333-D667 R1.0 motherbloard
Edit/Delete Message

9 replies

by jck

Vista/2003 realizes that your bios is not letting it command certain aspects of the system that it should.

You should get all the firmware updates you can for your mobo, then restart.

by tom_housden2k8

The motherboard is the latest revision, and I have updated all the drivers on the system, but I still get that error message

by larryd4

Looks like you have a failure on the MB. Could be something as simple as fluctuating power or a failing chip. I would check with MB manufacturer for a diagnostic program.

by philldmc

Have you tried clearing the bios via the jumper?

Clearing the bios may help. Just a suggestion. This will clear any custom settings and restore to factory defaults.

In addition have you tried one memory stick at a time make sure to elimate any possible memory issues?

This discussion is closed to new replies.