Question Locked

error message from Ubiquity edgerouter-X about subnet range

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everybody,

Just setting up an Edgerouter-X with a dhcp range of 192.168.2.0/24
Getting the error that none of the dhcp lease subnets are inside any of the subnets configured on broadcast interfaces.

Changing all to the 192.168.1.0/24 format, all goes well without any error message.

Any idea what might be wrong?

4 replies

by rproffitt edited

You only supplied what you wrote but in my opinion this is correct in that you changed your LAN and as such, subnets would not be in your new dhcp range.

Do you have staff with networking experience and training or is this company hoping to get by without?

by lekkeralgemeen

Thank you for your response!
What would be needed to have 192.168.2.0/24 as a subnet?
I changed from provider and am asking myself if this could be provider related or VLAN related?

I have no staff to take care of this.
Installing PV panels, Heatpumps and making 33kWh Lithium battery packs that can push 60kW are more my kind of stuff :-)

by rproffitt edited

I read no mention of your reserved IPs so only you would know the answer. Or you could try that.

by lekkeralgemeen

I cracked the case by giving the mail eth0 port the ip 192.168.2.1/24 and the dhcp server 192.168.2.0/24 which means the "1" t the first ip is not violated.

This discussion is closed to new replies.