Discussion Locked

Error message on a Win 2000 Server..

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win2000 server that is on the network not as a DHCP server (I have a router that is doing the DHCP) and I am getting the following errors:

Error 1

Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1051
Date: 4/5/2001
Time: 3:50:18 PM
User: N/A
Computer: MMC
Description:
The DHCP/BINL service has determined that it is not authorized to service
clients on this network for the Windows domain: MMC.com.
Data:
0000: 00 00 00 00

Error 2

Event Type: Warning
Event Source: SceCli
Event Category: None
Event ID: 1202
Date: 4/5/2001
Time: 5:15:37 PM
User: N/A
Computer: MMC
Description:
Security policies are propagated with warning. 0x534 : No mapping between
account names and security IDs was done.
Please look for more details in TroubleShooting section in Security Help.

Any thoughts on this? Thanks!

9 replies

by onurzaim

Dissable the segment that is related to DHCP server or client in "services" that is located in "Control panel\administrtive tools\" If the problem presists again check your network card configuration and try to use the program that is given with your router.

by ntoz

Check out the following, some are known Windows 2000 Bugs, I had issues with a client of mine:

Q247482

It can also be related to issues with Remote installation services. Here is some good information on this, in short the Boot Information Negotiation Layer must be authrozied even if your server doesnt run as a DHCP server as it services RIS clients much the same.

See:

Q221484

by frobo

Hi MJA,

when you install an DHCP Server in an w2k Environment with AD, you have to authorize the DHCP SERVER. It seems that you have forgot to do this, their for the Error?s you get is very normal.
Choose your MMC for AD Computer Management and right Click on that Sever to give him the rights he needs.

Hope it Helps

Frobo

by frobo

Sorry, for the comment but i dont read your hole message. Your Router must be authorized on the AD, but that is not enaugh. Is your Router benn able to update ddns Record for the Client ? If not : Install an DHCP Server on your w2k Server. This is realy easier to manage.

Frobo

This discussion is closed to new replies.