Discussion Locked

Ethernet network

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently took over our IS department. We are setting up a second building for the holidays. Unfortunately, the building is so long that we had to split the network into 5 segments in order to keep the lenght of each segment under the 100 meter range for Category 5 cabling. This resulted in 5 hubs in addition to the router at the front of the building where our ISDN line will be connecting from our main building to this second building. However, I read that with ethernet networks, you can't have more than 4 hubs in a chain. Is that true? If so, any suggestions on what to change? Perhaps replace one of the hubs with a repeater or see if I can have the ISDN line run into the main office instead, removing one of the hubs? This was all dropped in my lap and I have until Nov 24th to have the building up and running. Talk about pressure! Whoever has a solution, I would love to hear it. Thanks!

3 replies

by shmaltz

you cant use 5 hubs in a chain and on more then 2 hubs you will see very slow connections over long runs from hub to hub.
the only way around this is to use repeaters.
or use swithced hubs instead of regurllar hubs.

This discussion is closed to new replies.